diff --git a/README.md b/README.md index a4bb066..c71aa58 100644 --- a/README.md +++ b/README.md @@ -10,10 +10,12 @@ - [Mandatory Parameters](#mandatory-parameters) - [Optional Parameters](#optional-parameters) - [Getting ADSB data to the Ultrafeeder](#getting-adsb-data-to-the-ultrafeeder) - - [Connecting to an SDR or other hardware device](#connecting-to-a-sdr-or-other-hardware-device) + - [Connecting to an SDR or other hardware device](#connecting-to-an-sdr-or-other-hardware-device) - [Mandatory parameters](#mandatory-parameters-1) - [Optional/Additional Parameters](#optionaladditional-parameters) - - [AutoGain for RTLSDR Devices](#autogain-for-rtlsdr-devices) + - [Ultrafeeder AutoGain for RTLSDR Devices](#ultrafeeder-autogain-for-rtlsdr-devices) + - [Using `readsb`'s built-in AutoGain (recommended)](#using-readsbs-built-in-autogain-recommended) + - [Using the original AutoGain algorithm](#using-the-original-autogain-algorithm) - [Connecting to external ADSB data sources](#connecting-to-external-adsb-data-sources) - [All-in-One Configuration using `ULTRAFEEDER_CONFIG`](#all-in-one-configuration-using-ultrafeeder_config) - [Networking parameters](#networking-parameters) @@ -50,6 +52,7 @@ - [Output from Ultrafeeder to InfluxDBv2](#output-from-ultrafeeder-to-influxdbv2) - [Message decoding introspection](#message-decoding-introspection) - [Minimalist setup](#minimalist-setup) + - [Offline maps](#offline-maps) - [Logging](#logging) - [Getting help](#getting-help) - [License and Trademarks](#license-and-trademarks) @@ -240,12 +243,20 @@ If you want to connect your SDR to the container, here's how to do that: | Variable | Description | Controls which `readsb` option | Default | | ------------------- | ------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------ | -------- | -| `READSB_GAIN` | Set gain (in dB). Use `autogain` to have the container determine an appropriate gain, more on this below. | `--gain=` | Max gain | +| `READSB_GAIN` | Set gain (in dB). Use `autogain` to have the container determine an appropriate gain, more on this below. Leave this parameter empty (recommended) to use [`readsb`'s built-in auto-gain](#using-readsbs-built-in-autogain-recommended), or set it to `omit` or `off` to not pass this parameter to `readsb` | `--gain=` | Max gain | | `READSB_RTLSDR_PPM` | Set oscillator frequency correction in PPM. See [Estimating PPM](https://github.com/sdr-enthusiasts/docker-readsb-protobuf/#estimating-ppm) | `--ppm=` | Unset | -##### AutoGain for RTLSDR Devices +##### Ultrafeeder AutoGain for RTLSDR Devices -If you have set `READSB_GAIN=autogain`, then the system will take signal strength measurements to determine the optimal gain. The AutoGain functionality is based on a (slightly) modified version of [Wiedehopf's AutoGain](https://github.com/wiedehopf/autogain). AutoGain will only work with `rtlsdr` style receivers. +###### Using `readsb`'s built-in AutoGain (recommended) + +As of November 2024, we are recommending to leave the `READSB_GAIN` parameter empty by not including it in your configuration. This will engage the new built-in [autogain of `readsb`](https://github.com/wiedehopf/readsb?tab=readme-ov-file#autogain). This new algorithm uses continuous noise and signal strength measurements and is highly effective in environments with a mix of strong, local signals and distant, weak signals. + +(Experts only:) If you want to pass in any autogain parameters to `readsb`, you can do so by setting `READSB_GAIN` to (for example) `READSB_GAIN=auto-verbose,0,25,31,243`. See the explanation at Wiedehopf's [`readsb` repository](https://github.com/wiedehopf/readsb?tab=readme-ov-file#autogain) for more information about these parameters + +###### Using the original AutoGain algorithm + +You can still use the original autogain algorithm by setting `READSB_GAIN=autogain`. That algorithm is built into the container and it will take signal strength measurements to determine the optimal gain. The AutoGain functionality is based on a (slightly) modified version of [Wiedehopf's AutoGain](https://github.com/wiedehopf/autogain). AutoGain will only work with `rtlsdr` style receivers. Note that AutoGain is not related to the SDR's AGC setting (controlled with the `READSB_RTLSDR_ENABLE_AGC` variable). We do not recommend enabling AGC for Ultrafeeder or any other ADS-B decoder. @@ -359,7 +370,7 @@ bash <(wget -qO - https://raw.githubusercontent.com/sdr-enthusiasts/docker-adsb- Instead of (or in addition to) using `BEASTHOST`, you can also define ADSB data ingests using the `READSB_NET_CONNECTOR` parameter. This is the preferred way if you have multiple sources or destinations for your ADSB data. This variable allows you to configure incoming and outgoing connections. The variable takes a semicolon (`;`) separated list of `host,port,protocol[,uuid=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX]`, see the section [All-in-One Configuration using `ULTRAFEEDER_CONFIG`](#all-in-one-configuration-using-ultrafeeder_config) for explanation of these parameters. -NOTE: If you have a UAT dongle and use `dump978` to decode this, you should use `READSB_NET_CONNECTOR` to ingest UAT data from `dump978`. See example below +Note: if you have a UAT dongle and use `dump978` to decode this, you should use `READSB_NET_CONNECTOR` to ingest UAT data from `dump978`. See example below ```yaml environment: @@ -735,7 +746,7 @@ Note - on some systems (DietPi comes to mind), `/sys/class/thermal/` may not be #### Reducing Disk IO for Graphs1090 -Note - _this feature is still somewhat experimental. If you are really attached to your statistics/graphs1090 data, please make sure to back up your mapped drives regularly_ +Note - *this feature is still somewhat experimental. If you are really attached to your statistics/graphs1090 data, please make sure to back up your mapped drives regularly* If you are using a Raspberry Pi or another type of computer with an SD card, you may already be aware that these SD cards have a limited number of write-cycles that will determine their lifespan. In other words - a common reason for SD card failure is excessive writes to it. @@ -875,7 +886,7 @@ No paths need to be mapped through to persistent storage. However, if you don't | Path | Purpose | | ------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------- | -| `/opt/adsb/ultrafeeder/globe_history:/var/globe_history` | Holds range outline data, heatmap / replay data and traces if enabled. _Note: this data won't be automatically deleted, you will need to delete it eventually if you map this path._ | +| `/opt/adsb/ultrafeeder/globe_history:/var/globe_history` | Holds range outline data, heatmap / replay data and traces if enabled. *Note: this data won't be automatically deleted, you will need to delete it eventually if you map this path.* | | `/opt/adsb/ultrafeeder/timelapse1090:/var/timelapse1090` | Holds timelapse1090 data if enabled. (We recommend against enabling this feature, see above) | | `/opt/adsb/ultrafeeder/collectd:/var/lib/collectd` | Holds graphs1090 & performance data | | `/proc/diskstats:/proc/diskstats:ro` | Makes disk statistics available to `graphs1090` | @@ -936,7 +947,7 @@ docker exec -it ultrafeeder /usr/local/bin/viewadsb --cpr-focus 3D3ED0 ## Minimalist setup -If you want to use `ultrafeeder` _only_ as a SDR decoder but without any mapping or stats/graph websites, without MLAT connections or MLAT-hub, etc., for example to minimize CPU and RAM needs on a low CPU/memory single board computer, then do the following: +If you want to use `ultrafeeder` *only* as a SDR decoder but without any mapping or stats/graph websites, without MLAT connections or MLAT-hub, etc., for example to minimize CPU and RAM needs on a low CPU/memory single board computer, then do the following: - in the `ULTRAFEEDER_CONFIG` parameter, remove any entry that starts with `mlat` or `mlathub`. This will prevent any `mlat-client`s or `mlathub` instances to be launched. If you still want to connect the `mlat-client`(s) to external MLAT servers but you don't want to run the overhead of a MLATHUB, you can leave any entries starting with `mlat` in the `ULTRAFEEDER_CONFIG` parameter, and set `MLATHUB_DISABLE=true` - Set the parameter `TAR1090_DISABLE=true`. This will prevent the `nginx` webserver and any websites to be launched and no `collectd` (graphs1090) or `rrd` (ADSB message history) data to be collected or retained. @@ -954,7 +965,6 @@ There is the option to use some basic offline maps limited in zoom: - /usr/local/share/osm_tiles_offline:/usr/local/share/osm_tiles_offline ``` - ## Logging All logs are to the container's stdout and can be viewed with `docker logs -t [-f] container`. diff --git a/docker-compose.yml b/docker-compose.yml index 98c4d00..bbf7f12 100644 --- a/docker-compose.yml +++ b/docker-compose.yml @@ -28,7 +28,6 @@ services: - READSB_LAT=${FEEDER_LAT} - READSB_LON=${FEEDER_LONG} - READSB_ALT=${FEEDER_ALT_M}m - - READSB_GAIN=${ADSB_SDR_GAIN} - READSB_RX_LOCATION_ACCURACY=2 - READSB_STATS_RANGE=true # diff --git a/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/dependencies.d/startup b/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/dependencies.d/startup new file mode 100644 index 0000000..e69de29 diff --git a/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/run b/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/run new file mode 100755 index 0000000..ea60751 --- /dev/null +++ b/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/run @@ -0,0 +1,2 @@ +#!/bin/sh +exec /etc/s6-overlay/scripts/cleanup_globe_history diff --git a/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/type b/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/type new file mode 100644 index 0000000..5883cff --- /dev/null +++ b/rootfs/etc/s6-overlay/s6-rc.d/cleanup_globe_history/type @@ -0,0 +1 @@ +longrun diff --git a/rootfs/etc/s6-overlay/s6-rc.d/user/contents.d/cleanup_globe_history b/rootfs/etc/s6-overlay/s6-rc.d/user/contents.d/cleanup_globe_history new file mode 100755 index 0000000..e69de29 diff --git a/rootfs/etc/s6-overlay/scripts/cleanup_globe_history b/rootfs/etc/s6-overlay/scripts/cleanup_globe_history new file mode 100755 index 0000000..bfd5031 --- /dev/null +++ b/rootfs/etc/s6-overlay/scripts/cleanup_globe_history @@ -0,0 +1,40 @@ +#!/command/with-contenv bash +# shellcheck shell=bash disable=SC2015,SC2016,SC1091,SC2001,SC2154 + +#--------------------------------------------------------------------------------------------- +# Script to remove Globe_History files older than xxx days - this to ensure that the disk +# doesn't fill up with (unwanted) history files) + +# Copyright (C) 2023-2024, Ramon F. Kolb (kx1t) and contributors +# Core script copyright and provided by Matthias Wirth (wiedehopf), used with permission +# +# This program is free software: you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation, either version 3 of the License, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along with this program. +# If not, see . +#--------------------------------------------------------------------------------------------- + +source /scripts/common + +if [[ -z "$MAX_GLOBE_HISTORY" ]]; then + "${s6wrap[@]}" echo "MAX_GLOBE_HISTORY not set - we will not expire any globe_history files" + exec sleep infinity +fi + +cutoffepoch="$(date -d"-${MAX_GLOBE_HISTORY} days" +%s)" + +"${s6wrap[@]}" echo "Purging globe_history older than $MAX_GLOBE_HISTORY days (before $(date -d"-${MAX_GLOBE_HISTORY} days" +%d-%b-%Y))" +for dir in $(find /var/globe_history -maxdepth 3 -mindepth 3 | grep -o -E -e '[0-9]{4}/[0-9]{2}/[0-9]{2}$'); do + if (( $(date -d "$dir" +%s) < cutoffepoch )); then + rm -rf "/var/globe_history/$dir" + fi +done +"${s6wrap[@]}" echo "Done - next purge will be in 24 hours" +exec sleep 24h diff --git a/rootfs/etc/s6-overlay/scripts/mlat-client b/rootfs/etc/s6-overlay/scripts/mlat-client index a2592d3..9023518 100755 --- a/rootfs/etc/s6-overlay/scripts/mlat-client +++ b/rootfs/etc/s6-overlay/scripts/mlat-client @@ -83,7 +83,7 @@ if grep -qs "gpsd" <<< "$ULTRAFEEDER_CONFIG" || grep -qs "gpsd" <<< "$ULTRAFEEDE GPSD=1 LOCATION_PERSIST=/var/globe_history/gpsd_last_location if [[ -f "$LOCATION_PERSIST" ]]; then - read new_lat new_lon new_alt < "$LOCATION_PERSIST" + read -r new_lat new_lon new_alt < "$LOCATION_PERSIST" fi # initialize "old" location for gpsd movement detection # use zero island as starting point if location persist does not exit diff --git a/rootfs/etc/s6-overlay/scripts/readsb b/rootfs/etc/s6-overlay/scripts/readsb index d852b30..cd1c9d4 100755 --- a/rootfs/etc/s6-overlay/scripts/readsb +++ b/rootfs/etc/s6-overlay/scripts/readsb @@ -33,9 +33,11 @@ fi LOCATION_PERSIST=/var/globe_history/gpsd_last_location if [[ -f "$LOCATION_PERSIST" ]] && { grep -qs "gpsd" <<< "$ULTRAFEEDER_CONFIG" || grep -qs "gpsd" <<< "$ULTRAFEEDER_NET_CONNECTOR"; }; then - read LAT LON ALT < "$LOCATION_PERSIST" + # shellcheck disable=SC2034 + read -r LAT LONG ALT < "$LOCATION_PERSIST" READSB_LAT="" READSB_LON="" + # shellcheck disable=SC2034 READSB_ALT="" fi @@ -305,6 +307,8 @@ if [[ -n "$READSB_GAIN" ]]; then [[ "${READSB_GAIN,,}" == "autogain" ]] && gain="${READSB_AUTOGAIN_INITIAL_GAIN:-49.6}" || gain="${READSB_GAIN}" fi READSB_CMD+=("--gain=$gain") +elif [[ "${READSB_GAIN,,}" != "omit" ]] && [[ "${READSB_GAIN,,}" != "off" ]]; then + READSB_CMD+=("--gain=auto") fi ##### RTL-SDR OPTIONS ##### diff --git a/rootfs/scripts/interpret_ultrafeeder_config b/rootfs/scripts/interpret_ultrafeeder_config index 2495fd2..00f09a8 100755 --- a/rootfs/scripts/interpret_ultrafeeder_config +++ b/rootfs/scripts/interpret_ultrafeeder_config @@ -97,6 +97,14 @@ do done # Now add $readsb_str to the READSB_CONF_ARR() as --net-connector argument: READSB_CONF_ARR+=("--net-connector=${readsb_str}") + + if [[ ${param[1],,} == "in.adsb.lol" ]]; then + myadsblol="$(curl -sLD - https://my.adsb.lol -o /dev/null -w '%{url_effective}' 2>&1 | sed '/location: /h;g;$!d;s/^.* \(.*\)$/\1/')" + if [[ -n "$myadsblol" ]] && [[ ! $myadsblol =~ sorry-but-i-could-not-find-your-receiver ]]; then + "${s6wrap[@]}" echo "ADSB.LOL station map available at $myadsblol" + fi + fi + ;; mlat)