# Powerlevel10k
[](
https://gitter.im/powerlevel10k/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)
- **THE PROJECT HAS VERY LIMITED SUPPORT**
- **NO NEW FEATURES ARE IN THE WORKS**
- **MOST BUGS WILL GO UNFIXED**
- **HELP REQUESTS WILL BE IGNORED**
Powerlevel10k is a theme for Zsh. It emphasizes [speed](#uncompromising-performance),
[flexibility](#extremely-customizable) and [out-of-the-box experience](#configuration-wizard).
- [Getting started](#getting-started)
- [Features](#features)
- [Installation](#installation)
- [Configuration](#configuration)
- [Fonts](#fonts)
- [Try it in Docker](#try-it-in-docker)
- [License](#license)
- [FAQ](#faq)
- [Troubleshooting](#troubleshooting)
## Getting started
1. [Install the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). *Optional but highly
recommended.*
1. [Install Powerlevel10k](#installation) itself.
1. Restart Zsh with `exec zsh`.
1. Type `p10k configure` if the configuration wizard doesn't start automatically.
## Features
- [Configuration wizard](#configuration-wizard)
- [Uncompromising performance](#uncompromising-performance)
- [Powerlevel9k compatibility](#powerlevel9k-compatibility)
- [Pure compatibility](#pure-compatibility)
- [Instant prompt](#instant-prompt)
- [Show on command](#show-on-command)
- [Transient prompt](#transient-prompt)
- [Current directory that just works](#current-directory-that-just-works)
- [Extremely customizable](#extremely-customizable)
- [Batteries included](#batteries-included)
- [Extensible](#extensible)
### Configuration wizard
Type `p10k configure` to access the builtin configuration wizard right from your terminal.
Screen recording
All styles except [Pure](#pure-compatibility) are functionally equivalent. They display the same
information and differ only in presentation.
Configuration wizard creates `~/.p10k.zsh` based on your preferences. Additional prompt
customization can be done by editing this file. It has plenty of comments to help you navigate
through configuration options.
*Tip*: Install [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) before
running `p10k configure` to unlock all prompt styles.
*FAQ:*
- [What is the best prompt style in the configuration wizard?](
#what-is-the-best-prompt-style-in-the-configuration-wizard)
- [What do different symbols in Git status mean?](
#what-do-different-symbols-in-git-status-mean)
- [How do I change prompt colors?](#how-do-i-change-prompt-colors)
*Troubleshooting*:
- [Some prompt styles are missing from the configuration wizard](
#some-prompt-styles-are-missing-from-the-configuration-wizard).
- [Question mark in prompt](#question-mark-in-prompt).
- [Icons, glyphs or powerline symbols don't render](#icons-glyphs-or-powerline-symbols-dont-render).
- [Sub-pixel imperfections around powerline symbols](
#sub-pixel-imperfections-around-powerline-symbols).
- [Directory is difficult to see in prompt when using Rainbow style](
#directory-is-difficult-to-see-in-prompt-when-using-rainbow-style).
### Uncompromising performance
When you hit *ENTER*, the next prompt appears instantly. With Powerlevel10k there is no prompt lag.
If you install Cygwin on Raspberry Pi, `cd` into a Linux Git repository and activate enough prompt
segments to fill four prompt lines on both sides of the screen... wait, that's just crazy and no
one ever does that. Probably impossible, too. The point is, Powerlevel10k prompt is always fast, no
matter what you do!
Screen recording
Note how the effect of every command is instantly reflected by the very next prompt.
| Command | Prompt Indicator | Meaning |
|-------------------------------|:----------------:|----------------------------------------------------------------------:|
| `timew start hack linux` | `โ hack linux` | time tracking enabled in [timewarrior](https://timewarrior.net/) |
| `touch x y` | `?2` | 2 untracked files in the Git repo |
| `rm COPYING` | `!1` | 1 unstaged change in the Git repo |
| `echo 3.7.3 >.python-version` | `๐ 3.7.3` | the current python version in [pyenv](https://github.com/pyenv/pyenv) |
Other Zsh themes capable of displaying the same information either produce prompt lag or print
prompt that doesn't reflect the current state of the system and then refresh it later. With
Powerlevel10k you get fast prompt *and* up-to-date information.
*FAQ*: [Is it really fast?](#is-it-really-fast)
### Powerlevel9k compatibility
Powerlevel10k understands all [Powerlevel9k](https://github.com/Powerlevel9k/powerlevel9k)
configuration parameters.
Screen recording
[Migration](#installation) from Powerlevel9k to Powerlevel10k is a straightforward process. All
your `POWERLEVEL9K` configuration parameters will still work. Prompt will look the same as before
([almost](
#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config))
but it will be [much faster](#uncompromising-performance) ([certainly](#is-it-really-fast)).
*FAQ*:
- [I'm using Powerlevel9k with Oh My Zsh. How do I migrate?](
#im-using-powerlevel9k-with-oh-my-zsh-how-do-i-migrate)
- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?](
#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config)
- [What is the relationship between Powerlevel9k and Powerlevel10k?](
#What-is-the-relationship-between-powerlevel9k-and-powerlevel10k)
### Pure compatibility
Powerlevel10k can produce the same prompt as [Pure](https://github.com/sindresorhus/pure). Type
`p10k configure` and select *Pure* style.
Screen recording
You can still use Powerlevel10k features such as [transient prompt](#transient-prompt) or
[instant prompt](#instant-prompt) when sporting Pure style.
To customize prompt, edit `~/.p10k.zsh`. Powerlevel10k doesn't recognize Pure configuration
parameters, so you'll need to use `POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3` instead of
`PURE_CMD_MAX_EXEC_TIME=3`, etc. All relevant parameters are in `~/.p10k.zsh`. This file has
plenty of comments to help you navigate through it.
*FAQ:* [What is the best prompt style in the configuration wizard?](
#what-is-the-best-prompt-style-in-the-configuration-wizard)
### Instant prompt
If your `~/.zshrc` loads many plugins, or perhaps just a few slow ones
(for example, [pyenv](https://github.com/pyenv/pyenv) or [nvm](https://github.com/nvm-sh/nvm)), you
may have noticed that it takes some time for Zsh to start.
Screen recording
Powerlevel10k can remove Zsh startup lag **even if it's not caused by a theme**.
Screen recording
This feature is called *Instant Prompt*. You need to explicitly enable it through `p10k configure`
or [manually](#how-do-i-configure-instant-prompt). It does what it says on the tin -- prints prompt
instantly upon Zsh startup allowing you to start typing while plugins are still loading.
Other themes *increase* Zsh startup lag -- some by a lot, others by a just a little. Powerlevel10k
*removes* it outright.
If you are curious about how *Instant Prompt* works, see
[this section in zsh-bench](https://github.com/romkatv/zsh-bench#instant-prompt).
*FAQ:* [How do I configure instant prompt?](#how-do-i-configure-instant-prompt)
### Show on command
The behavior of some commands depends on global environment. For example, `kubectl run ...` runs an
image on the cluster defined by the current kubernetes context. If you frequently change context
between "prod" and "testing", you might want to display the current context in Zsh prompt. If you do
likewise for AWS, Azure and Google Cloud credentials, prompt will get pretty crowded.
Enter *Show On Command*. This feature makes prompt segments appear only when they are relevant to
the command you are currently typing.
Screen recording
Configs created by `p10k configure` enable show on command for several prompt segments by default.
Here's the relevant parameter for kubernetes context:
```zsh
# Show prompt segment "kubecontext" only when the command you are typing invokes one of these tools.
typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens'
```
To customize when different prompt segments are shown, open `~/.p10k.zsh`, search for
`SHOW_ON_COMMAND` and either remove these parameters to display affected segments unconditionally,
or change their values.
### Transient prompt
When *Transient Prompt* is enabled through `p10k configure`, Powerlevel10k will trim down every
prompt when accepting a command line.
Screen recording
Transient prompt makes it much easier to copy-paste series of commands from the terminal scrollback.
*Tip*: If you enable transient prompt, take advantage of two-line prompt. You'll get the benefit of
extra space for typing commands without the usual drawback of reduced scrollback density. Sparse
prompt (with an empty line before prompt) also works great in combination with transient prompt.
### Current directory that just works
The current working directory is perhaps the most important prompt segment. Powerlevel10k goes to
great length to highlight its important parts and to truncate it with the least loss of information
when horizontal space gets scarce.
Screen recording
When the full directory doesn't fit, the leftmost segment gets truncated to its shortest unique
prefix. In the screencast, `~/work` becomes `~/wo`. It couldn't be truncated to `~/w` because it
would be ambiguous (there was `~/wireguard` when the session was recorded). The next segment --
`projects` -- turns into `p` as there was nothing else that started with `p` in `~/work/`.
Directory segments are shown in one of three colors:
- Truncated segments are bleak.
- Important segments are bright and never truncated. These include the first and the last segment,
roots of Git repositories, etc.
- Regular segments (not truncated but can be) use in-between color.
*Tip*: If you copy-paste a truncated directory and hit *TAB*, it'll complete to the original.
*Troubleshooting*: [Directory is difficult to see in prompt when using Rainbow style.](
#directory-is-difficult-to-see-in-prompt-when-using-rainbow-style)
### Extremely customizable
Powerlevel10k can be configured to look like any other Zsh theme out there.
Screen recording
[Pure](#pure-compatibility), [Powerlevel9k](#powerlevel9k-compatibility) and [robbyrussell](
#how-to-make-powerlevel10k-look-like-robbyrussell-oh-my-zsh-theme) emulations are built-in.
To emulate the appearance of other themes, you'll need to write a suitable configuration file. The
best way to go about it is to run `p10k configure`, select the style that is the closest to your
goal and then edit `~/.p10k.zsh`.
The full range of Powerlevel10k appearance spans from spartan:
To ~~ridiculous~~ extravagant:
### Batteries included
Powerlevel10k comes with dozens of built-in high quality prompt segments that can display
information from a variety of sources. When you run `p10k configure` and choose any style
except [Pure](#pure-compatibility), many of these segments get enabled by
default while others can be manually enabled by opening `~/.p10k.zsh` and uncommenting them.
You can enable as many segments as you like. It won't slow down your prompt or Zsh startup.
| Segment | Meaning |
|--------:|---------|
| `anaconda` | virtual environment from [conda](https://conda.io/) |
| `asdf` | tool versions from [asdf](https://github.com/asdf-vm/asdf) |
| `aws` | [aws profile](https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) |
| `aws_eb_env` | [aws elastic beanstalk](https://aws.amazon.com/elasticbeanstalk/) environment |
| `azure` | [azure](https://docs.microsoft.com/en-us/cli/azure) account name |
| `background_jobs` | presence of background jobs |
| `battery` | internal battery state and charge level (yep, batteries *literally* included) |
| `command_execution_time` | duration (wall time) of the last command |
| `context` | user@hostname |
| `cpu_arch` | CPU architecture |
| `dir` | current working directory |
| `direnv` | [direnv](https://direnv.net/) status |
| `disk_usage` | disk usage |
| `dotnet_version` | [dotnet](https://dotnet.microsoft.com) version |
| `fvm` | flutter environment from [fvm](https://github.com/leoafarias/fvm) |
| `gcloud` | [google cloud](https://cloud.google.com/) cli account and project |
| `goenv` | go environment from [goenv](https://github.com/syndbg/goenv) |
| `google_app_cred` | [google application credentials](https://cloud.google.com/docs/authentication/production) |
| `go_version` | [go](https://golang.org) version |
| `haskell_stack` | haskell version from [stack](https://haskellstack.org/) |
| `ip` | IP address and bandwidth usage for a specified network interface |
| `java_version` | [java](https://www.java.com/) version |
| `jenv` | java environment from [jenv](https://github.com/jenv/jenv) |
| `kubecontext` | current [kubernetes](https://kubernetes.io/) context |
| `laravel_version` | [laravel php framework](https://laravel.com/) version |
| `load` | CPU load |
| `luaenv` | lua environment from [luaenv](https://github.com/cehoffman/luaenv) |
| `midnight_commander` | [midnight commander](https://midnight-commander.org/) shell |
| `nix_shell` | [nix shell](https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) indicator |
| `nnn` | [nnn](https://github.com/jarun/nnn) shell |
| `lf` | [lf](https://github.com/gokcehan/lf) shell |
| `chezmoi_shell` | [chezmoi](https://www.chezmoi.io/) shell |
| `nodeenv` | node.js environment from [nodeenv](https://github.com/ekalinin/nodeenv) |
| `nodenv` | node.js environment from [nodenv](https://github.com/nodenv/nodenv) |
| `node_version` | [node.js](https://nodejs.org/) version |
| `nordvpn` | [nordvpn](https://nordvpn.com/) connection status |
| `nvm` | node.js environment from [nvm](https://github.com/nvm-sh/nvm) |
| `os_icon` | your OS logo (apple for macOS, swirl for debian, etc.) |
| `package` | `name@version` from [package.json](https://docs.npmjs.com/files/package.json) |
| `per_directory_history` | Oh My Zsh [per-directory-history](https://github.com/jimhester/per-directory-history) local/global indicator |
| `perlbrew` | perl version from [perlbrew](https://github.com/gugod/App-perlbrew) |
| `phpenv` | php environment from [phpenv](https://github.com/phpenv/phpenv) |
| `php_version` | [php](https://www.php.net/) version |
| `plenv` | perl environment from [plenv](https://github.com/tokuhirom/plenv) |
| `prompt_char` | multi-functional prompt symbol; changes depending on vi mode: `โฏ`, `โฎ`, `V`, `โถ` for insert, command, visual and replace mode respectively; turns red on error |
| `proxy` | system-wide http/https/ftp proxy |
| `public_ip` | public IP address |
| `pyenv` | python environment from [pyenv](https://github.com/pyenv/pyenv) |
| `ram` | free RAM |
| `ranger` | [ranger](https://github.com/ranger/ranger) shell |
| `yazi` | [yazi](https://github.com/sxyazi/yazi) shell |
| `rbenv` | ruby environment from [rbenv](https://github.com/rbenv/rbenv) |
| `rust_version` | [rustc](https://www.rust-lang.org) version |
| `rvm` | ruby environment from [rvm](https://rvm.io) |
| `scalaenv` | scala version from [scalaenv](https://github.com/scalaenv/scalaenv) |
| `status` | exit code of the last command |
| `swap` | used swap |
| `taskwarrior` | [taskwarrior](https://taskwarrior.org/) task count |
| `terraform` | [terraform](https://www.terraform.io) workspace |
| `terraform_version` | [terraform](https://www.terraform.io) version |
| `time` | current time |
| `timewarrior` | [timewarrior](https://timewarrior.net/) tracking status |
| `todo` | [todo](https://github.com/todotxt/todo.txt-cli) items |
| `toolbox` | [toolbox](https://github.com/containers/toolbox) name |
| `vcs` | Git repository status |
| `vim_shell` | [vim](https://www.vim.org/) shell (`:sh`) |
| `virtualenv` | python environment from [venv](https://docs.python.org/3/library/venv.html) |
| `vi_mode` | vi mode (you don't need this if you've enabled prompt_char) |
| `vpn_ip` | virtual private network indicator |
| `wifi` | WiFi speed |
| `xplr` | [xplr](https://github.com/sayanarijit/xplr) shell |
### Extensible
If there is no prompt segment that does what you need, implement your own. Powerlevel10k provides
public API for defining segments that are as fast and as flexible as built-in ones.
Screen recording
On Linux you can fetch current CPU temperature by reading `/sys/class/thermal/thermal_zone0/temp`.
The screencast shows how to define a prompt segment to display this value. Once the segment is
defined, you can use it like any other segment. All standard customization parameters will work for
it out of the box.
Type `p10k help segment` for reference.
*Note*: If you modify `POWERLEVEL9K_*` parameters in an already initialized interactive shell (as
opposed to editing `~/.p10k.zsh`), the changes might not be immediately effective. To apply the
modifications, invoke `p10k reload`. Setting `POWERLEVEL9K_DISABLE_HOT_RELOAD=false` eliminates the
necessity for `p10k reload` but results in a marginally slower prompt.
*Tip*: Prefix names of your own segments with `my_` to avoid clashes with future versions of
Powerlevel10k.
## Installation
- [Manual](#manual) ๐ **choose this if confused or uncertain**
- [Oh My Zsh](#oh-my-zsh)
- [Prezto](#prezto)
- [Zim](#zim)
- [Antibody](#antibody)
- [Antidote](#antidote)
- [Antigen](#antigen)
- [Zplug](#zplug)
- [Zgen](#zgen)
- [Zplugin](#zplugin)
- [Zinit](#zinit)
- [Zi](#zi)
- [Zap](#zap)
- [Homebrew](#homebrew)
- [Arch Linux](#arch-linux)
- [Alpine Linux](#alpine-linux)
- [Fig](#fig)
- [Sheldon](#sheldon)
### Manual
```zsh
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k
echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc
```
Users in China can use the official mirror on gitee.com for faster download.
ไธญๅฝ็จๆทๅฏไปฅไฝฟ็จ gitee.com ไธ็ๅฎๆน้ๅๅ ้ไธ่ฝฝ.
```zsh
git clone --depth=1 https://gitee.com/romkatv/powerlevel10k.git ~/powerlevel10k
echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc
```
This is the simplest kind of installation and it works even if you are using a plugin manager. Just
make sure to disable the current theme in your plugin manager. See
[troubleshooting](#cannot-make-powerlevel10k-work-with-my-plugin-manager) for help.
### Oh My Zsh
1. Clone the repository:
```zsh
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
```
Users in China can use the official mirror on gitee.com for faster download.
ไธญๅฝ็จๆทๅฏไปฅไฝฟ็จ gitee.com ไธ็ๅฎๆน้ๅๅ ้ไธ่ฝฝ.
```zsh
git clone --depth=1 https://gitee.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
```
2. Set `ZSH_THEME="powerlevel10k/powerlevel10k"` in `~/.zshrc`.
### Prezto
Add `zstyle :prezto:module:prompt theme powerlevel10k` to `~/.zpreztorc`.
### Zim
Add `zmodule romkatv/powerlevel10k --use degit` to `~/.zimrc` and run `zimfw install`.
### Antibody
Add `antibody bundle romkatv/powerlevel10k` to `~/.zshrc`.
### Antidote
Add `romkatv/powerlevel10k` to `~/.zsh_plugins.txt`.
### Antigen
Add `antigen theme romkatv/powerlevel10k` to `~/.zshrc`. Make sure you have `antigen apply`
somewhere after it.
### Zplug
Add `zplug romkatv/powerlevel10k, as:theme, depth:1` to `~/.zshrc`.
### Zgen
Add `zgen load romkatv/powerlevel10k powerlevel10k` to `~/.zshrc`.
### Zplugin
Add `zplugin ice depth=1; zplugin light romkatv/powerlevel10k` to `~/.zshrc`.
The use of `depth=1` ice is optional. Other types of ice are neither recommended nor officially
supported by Powerlevel10k.
### Zinit
Add `zinit ice depth=1; zinit light romkatv/powerlevel10k` to `~/.zshrc`.
The use of `depth=1` ice is optional. Other types of ice are neither recommended nor officially
supported by Powerlevel10k.
### Zi
Add `zi ice depth=1; zi light romkatv/powerlevel10k` to `~/.zshrc`.
The use of `depth=1` ice is optional. Other types of ice are neither recommended nor officially
supported by Powerlevel10k.
### Zap
Add `plug "romkatv/powerlevel10k"` to `~/.zshrc`.
### Homebrew
```zsh
brew install powerlevel10k
echo "source $(brew --prefix)/share/powerlevel10k/powerlevel10k.zsh-theme" >>~/.zshrc
```
### Arch Linux
```zsh
yay -S --noconfirm zsh-theme-powerlevel10k-git
echo 'source /usr/share/zsh-theme-powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc
```
[zsh-theme-powerlevel10k-git](https://aur.archlinux.org/packages/zsh-theme-powerlevel10k-git/)
referenced above is the official Powerlevel10k package.
There is also [zsh-theme-powerlevel10k](
https://www.archlinux.org/packages/extra/x86_64/zsh-theme-powerlevel10k/) package.
Historically, [it has been breaking often and for extended periods of time](
https://github.com/romkatv/powerlevel10k/pull/786). **Do not use it.**
### Alpine Linux
```zsh
apk add zsh zsh-theme-powerlevel10k
mkdir -p ~/.local/share/zsh/plugins
ln -s /usr/share/zsh/plugins/powerlevel10k ~/.local/share/zsh/plugins/
```
### Fig
Follow the instructions on
[this page](https://fig.io/plugins/other/powerlevel10k).
### Sheldon
Add the following to the Sheldon config file.
```toml
[plugins.powerlevel10k]
github = "romkatv/powerlevel10k"
```
Or run the following to automatically add it.
```zsh
sheldon add powerlevel10k --github romkatv/powerlevel10k
```
## Configuration
- [For new users](#for-new-users)
- [For Powerlevel9k users](#for-powerlevel9k-users)
### For new users
On the first run, Powerlevel10k [configuration wizard](#configuration-wizard) will ask you a few
questions and configure your prompt. If it doesn't trigger automatically, type `p10k configure`.
Configuration wizard creates `~/.p10k.zsh` based on your preferences. Additional prompt
customization can be done by editing this file. It has plenty of comments to help you navigate
through configuration options.
*FAQ*:
- [What is the best prompt style in the configuration wizard?](
#what-is-the-best-prompt-style-in-the-configuration-wizard)
- [What do different symbols in Git status mean?](
#what-do-different-symbols-in-git-status-mean)
- [How do I change the format of Git status?](#how-do-i-change-the-format-of-git-status)
- [How do I add username and/or hostname to prompt?](
#how-do-i-add-username-andor-hostname-to-prompt)
- [How do I change prompt colors?](#how-do-i-change-prompt-colors)
- [Why some prompt segments appear and disappear as I'm typing?](
#why-some-prompt-segments-appear-and-disappear-as-im-typing)
*Troubleshooting*:
- [Question mark in prompt](#question-mark-in-prompt).
- [Icons, glyphs or powerline symbols don't render](#icons-glyphs-or-powerline-symbols-dont-render).
- [Sub-pixel imperfections around powerline symbols](
#sub-pixel-imperfections-around-powerline-symbols).
- [Directory is difficult to see in prompt when using Rainbow style](
#directory-is-difficult-to-see-in-prompt-when-using-rainbow-style).
### For Powerlevel9k users
If you've been using Powerlevel9k before, **do not remove the configuration options**. Powerlevel10k
will pick them up and provide you with the same prompt UI you are used to. See
[Powerlevel9k compatibility](#powerlevel9k-compatibility).
*FAQ*:
- [I'm using Powerlevel9k with Oh My Zsh. How do I migrate?](
#im-using-powerlevel9k-with-oh-my-zsh-how-do-i-migrate)
- [What is the relationship between Powerlevel9k and Powerlevel10k?](
#what-is-the-relationship-between-powerlevel9k-and-powerlevel10k)
- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?](
#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config)
*Troubleshooting*: [Extra or missing spaces in prompt compared to Powerlevel9k](
#extra-or-missing-spaces-in-prompt-compared-to-powerlevel9k).
## Fonts
Powerlevel10k doesn't require custom fonts but can take advantage of them if they are available.
It works well with [Nerd Fonts](https://github.com/ryanoasis/nerd-fonts),
[Source Code Pro](https://github.com/adobe-fonts/source-code-pro),
[Font Awesome](https://fontawesome.com/), [Powerline](https://github.com/powerline/fonts), and even
the default system fonts. The full choice of style options is available only when using
[Nerd Fonts](https://github.com/ryanoasis/nerd-fonts).
๐ **Recommended font**: Meslo Nerd Font patched for Powerlevel10k. ๐
### Meslo Nerd Font patched for Powerlevel10k
Gorgeous monospace font designed by Jim Lyles for Bitstream, customized by the same for Apple,
further customized by Andrรฉ Berg, and finally patched by yours truly with customized scripts
originally developed by Ryan L McIntyre of Nerd Fonts. Contains all glyphs and symbols that
Powerlevel10k may need. Battle-tested in dozens of different terminals on all major operating
systems.
*FAQ*: [How was the recommended font created?](#how-was-the-recommended-font-created)
#### Automatic font installation
If you are using iTerm2 or Termux, `p10k configure` can install the recommended font for you.
Simply answer `Yes` when asked whether to install *Meslo Nerd Font*.
If you are using a different terminal, proceed with manual font installation. ๐
#### Manual font installation
1. Download these four ttf files:
- [MesloLGS NF Regular.ttf](
https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Regular.ttf)
- [MesloLGS NF Bold.ttf](
https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Bold.ttf)
- [MesloLGS NF Italic.ttf](
https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Italic.ttf)
- [MesloLGS NF Bold Italic.ttf](
https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Bold%20Italic.ttf)
1. Double-click on each file and click "Install". This will make `MesloLGS NF` font available to all
applications on your system.
1. Configure your terminal to use this font:
- **iTerm2**: Type `p10k configure` and answer `Yes` when asked whether to install
*Meslo Nerd Font*. Alternatively, open *iTerm2 โ Preferences โ Profiles โ Text* and set *Font* to
`MesloLGS NF`.
- **Apple Terminal**: Open *Terminal โ Preferences โ Profiles โ Text*, click *Change* under *Font*
and select `MesloLGS NF` family.
- **Hyper**: Open *Hyper โ Edit โ Preferences* and change the value of `fontFamily` under
`module.exports.config` to `MesloLGS NF`.
- **Visual Studio Code**: Open *File โ Preferences โ Settings* (PC) or
*Code โ Preferences โ Settings* (Mac), enter `terminal.integrated.fontFamily` in the search box at
the top of *Settings* tab and set the value below to `MesloLGS NF`.
Consult [this screenshot](
https://raw.githubusercontent.com/romkatv/powerlevel10k-media/389133fb8c9a2347929a23702ce3039aacc46c3d/visual-studio-code-font-settings.jpg)
to see how it should look like or see [this issue](
https://github.com/romkatv/powerlevel10k/issues/671) for extra information.
- **GNOME Terminal** (the default Ubuntu terminal): Open *Terminal โ Preferences* and click on the
selected profile under *Profiles*. Check *Custom font* under *Text Appearance* and select
`MesloLGS NF Regular`.
- **Konsole**: Open *Settings โ Edit Current Profile โ Appearance*, click *Select Font* and select
`MesloLGS NF Regular`.
- **Tilix**: Open *Tilix โ Preferences* and click on the selected profile under *Profiles*. Check
*Custom font* under *Text Appearance* and select `MesloLGS NF Regular`.
- **Windows Console Host** (the old thing): Click the icon in the top left corner, then
*Properties โ Font* and set *Font* to `MesloLGS NF`.
- **Windows Terminal** by Microsoft (the new thing): Open *Settings* (Ctrl+,), click
either on the selected profile under *Profiles* or on *Defaults*, click *Appearance* and set
*Font face* to `MesloLGS NF`.
- **Conemu**: Open *Setup โ General โ Fonts* and set *Main console font* to `MesloLGS NF`.
- **IntelliJ** (and other IDEs by Jet Brains): Open *IDE โ Edit โ Preferences โ Editor โ
Color Scheme โ Console Font*. Select *Use console font instead of the default* and set the font
name to `MesloLGS NF`.
- **Termux**: Type `p10k configure` and answer `Yes` when asked whether to install
*Meslo Nerd Font*.
- **Blink**: Type `config`, go to *Appearance*, tap *Add a new font*, tap *Open Gallery*, select
*MesloLGS NF.css*, tap *import* and type `exit` in the home view to reload the font.
- **Tabby** (formerly **Terminus**): Open *Settings โ Appearance* and set *Font* to `MesloLGS NF`.
- **Terminator**: Open *Preferences* using the context menu. Under *Profiles* select the *General*
tab (should be selected already), uncheck *Use the system fixed width font* (if not already)
and select `MesloLGS NF Regular`. Exit the Preferences dialog by clicking *Close*.
- **Guake**: Right Click on an open terminal and open *Preferences*. Under *Appearance*
tab, uncheck *Use the system fixed width font* (if not already) and select `MesloLGS NF Regular`.
Exit the Preferences dialog by clicking *Close*.
- **MobaXterm**: Open *Settings* โ *Configuration* โ *Terminal* โ (under *Terminal look and feel*)
and change *Font* to `MesloLGS NF`. If you have *sessions*, you need to change the font in each
of them through *Settings* โ right click on an individual session โ *Edit Session* โ *Terminal
Settings* โ *Font settings*.
- **Asbrรบ Connection Manager**: Open *Preferences โ Local Shell Options โ Look and Feel*, enable
*Use these personal options* and change *Font:* under *Terminal UI* to `MesloLGS NF Regular`.
To change the font for the remote host connections, go to *Preferences โ Terminal Options โ
Look and Feel* and change *Font:* under *Terminal UI* to `MesloLGS NF Regular`.
- **WSLtty**: Right click on an open terminal and then on *Options*. In the *Text* section, under
*Font*, click *"Select..."* and set Font to `MesloLGS NF Regular`.
- **Yakuake**: Click *โก* โ *Manage Profiles* โ *New* โ *Appearance*. Click *Choose* next to the
*Font* dropdown, select `MesloLGS NF` and click *OK*. Click *OK* to save the profile. Select the
new profile and click *Set as Default*.
- **Alacritty**: Create or open `~/.config/alacritty/alacritty.toml` and add the following
section to it:
```toml
[font.normal]
family = "MesloLGS NF"
```
- **foot**: Create or open `~/.config/foot/foot.ini` and add the following section to it:
```ini
font=MesloLGS NF:size=12
```
- **kitty**: Create or open `~/.config/kitty/kitty.conf` and add the following line to it:
```text
font_family MesloLGS NF
```
Restart kitty by closing all sessions and opening a new session.
- **puTTY**: Set *Window* โ *Appearance* โ *Font* to `MesloLGS NF`. Requires puTTY
version >= 0.75.
- **WezTerm**: Create or open `$HOME/.config/wezterm/wezterm.lua` and add the following:
```lua
local wezterm = require 'wezterm';
return {
font = wezterm.font("MesloLGS NF"),
}
```
If the file already exists, only add the line with the font to the existing return.
Also add the first line if it is not already present.
- **urxvt**: Create or open `~/.Xresources` and add the following line to it:
```text
URxvt.font: xft:MesloLGS NF:size=11
```
You can adjust the font size to your preference. After changing the config run
`xrdb ~/.Xresources` to reload it. The new config is applied to all new terminals.
- **xterm**: Create or open `~/.Xresources` and add the following line to it:
```text
xterm*faceName: MesloLGS NF
```
After changing the config run `xrdb ~/.Xresources` to reload it. The new config is applied to
all new terminals.
- **Zed**: Open `~/.config/zed/settings.json` and set `terminal.font_family` to `"MesloLGS NF"`.
```jsonc
{
"terminal": {
"font_family": "MesloLGS NF"
},
// Other settings.
}
```
- Crostini (Linux on Chrome OS): Open
chrome-untrusted://terminal/html/nassh_preferences_editor.html, set *Text font family* to
`'MesloLGS NF'` (including the quotes) and *Custom CSS (inline text)* to the following:
```css
@font-face {
font-family: "MesloLGS NF";
src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Regular.ttf");
font-weight: normal;
font-style: normal;
}
@font-face {
font-family: "MesloLGS NF";
src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Bold.ttf");
font-weight: bold;
font-style: normal;
}
@font-face {
font-family: "MesloLGS NF";
src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Italic.ttf");
font-weight: normal;
font-style: italic;
}
@font-face {
font-family: "MesloLGS NF";
src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Bold%20Italic.ttf");
font-weight: bold;
font-style: italic;
}
```
**_CAVEAT_**: If you open the normal terminal preferences these settings will be overwritten.
1. Run `p10k configure` to generate a new `~/.p10k.zsh`. The old config may work
incorrectly with the new font.
_Using a different terminal and know how to set the font for it? Share your knowledge by sending a
PR to expand the list!_
## Try it in Docker
Try Powerlevel10k in Docker. You can safely make any changes to the file system while trying out
the theme. Once you exit Zsh, the container is deleted.
```zsh
docker run -e TERM -e COLORTERM -e LC_ALL=C.UTF-8 -it --rm alpine sh -uec '
apk add git zsh nano vim
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k
echo "source ~/powerlevel10k/powerlevel10k.zsh-theme" >>~/.zshrc
cd ~/powerlevel10k
exec zsh'
```
*Tip*: Install [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) before
running the Docker command to get access to all prompt styles.
*Tip*: Run `p10k configure` while in Docker to try a different prompt style.
## License
Powerlevel10k is released under the
[MIT license](https://github.com/romkatv/powerlevel10k/blob/master/LICENSE).
## FAQ
- [How do I update Powerlevel10k?](#how-do-i-update-powerlevel10k)
- [How do I uninstall Powerlevel10k?](#how-do-i-uninstall-powerlevel10k)
- [How do I install Powerlevel10k on a machine without Internet access?](#how-do-i-install-powerlevel10k-on-a-machine-without-internet-access)
- [Where can I ask for help and report bugs?](#where-can-i-ask-for-help-and-report-bugs)
- [Which aspects of shell and terminal does Powerlevel10k affect?](#which-aspects-of-shell-and-terminal-does-powerlevel10k-affect)
- [I'm using Powerlevel9k with Oh My Zsh. How do I migrate?](#im-using-powerlevel9k-with-oh-my-zsh-how-do-i-migrate)
- [Is it really fast?](#is-it-really-fast)
- [How do I configure instant prompt?](#how-do-i-configure-instant-prompt)
- [How do I initialize direnv when using instant prompt?](#how-do-i-initialize-direnv-when-using-instant-prompt)
- [How do I export GPG_TTY when using instant prompt?](#how-do-i-export-gpg_tty-when-using-instant-prompt)
- [What do different symbols in Git status mean?](#what-do-different-symbols-in-git-status-mean)
- [How do I change the format of Git status?](#how-do-i-change-the-format-of-git-status)
- [Why is Git status from `$HOME/.git` not displayed in prompt?](#why-is-git-status-from-homegit-not-displayed-in-prompt)
- [Why does Git status sometimes appear grey and then gets colored after a short period of time?](#why-does-git-status-sometimes-appear-grey-and-then-gets-colored-after-a-short-period-of-time)
- [How do I add username and/or hostname to prompt?](#how-do-i-add-username-andor-hostname-to-prompt)
- [Why some prompt segments appear and disappear as I'm typing?](#why-some-prompt-segments-appear-and-disappear-as-im-typing)
- [How do I change prompt colors?](#how-do-i-change-prompt-colors)
- [Why does Powerlevel10k spawn extra processes?](#why-does-powerlevel10k-spawn-extra-processes)
- [Are there configuration options that make Powerlevel10k slow?](#are-there-configuration-options-that-make-powerlevel10k-slow)
- [Is Powerlevel10k fast to load?](#is-powerlevel10k-fast-to-load)
- [What is the relationship between Powerlevel9k and Powerlevel10k?](#what-is-the-relationship-between-powerlevel9k-and-powerlevel10k)
- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?](#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config)
- [What is the best prompt style in the configuration wizard?](#what-is-the-best-prompt-style-in-the-configuration-wizard)
- [How to make Powerlevel10k look like robbyrussell Oh My Zsh theme?](#how-to-make-powerlevel10k-look-like-robbyrussell-oh-my-zsh-theme)
- [Can prompts for completed commands display error status for *those* commands instead of the commands preceding them?](#can-prompts-for-completed-commands-display-error-status-for-those-commands-instead-of-the-commands-preceding-them)
- [What is the minimum supported Zsh version?](#what-is-the-minimum-supported-zsh-version)
- [How were these screenshots and animated gifs created?](#how-were-these-screenshots-and-animated-gifs-created)
- [How was the recommended font created?](#how-was-the-recommended-font-created)
- [How to package Powerlevel10k for distribution?](#how-to-package-powerlevel10k-for-distribution)
### How do I update Powerlevel10k?
The command to update Powerlevel10k depends on how it was installed.
| Installation | Update command |
|-------------------------------|-------------------------------------------------------------|
| [Manual](#manual) | `git -C ~/powerlevel10k pull` |
| [Oh My Zsh](#oh-my-zsh) | `git -C ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k pull` |
| [Prezto](#prezto) | `zprezto-update` |
| [Zim](#zim) | `zimfw update` |
| [Antigen](#antigen) | `antigen update` |
| [Antidote](#antidote) | `antidote update` |
| [Zplug](#zplug) | `zplug update` |
| [Zgen](#zgen) | `zgen update` |
| [Zplugin](#zplugin) | `zplugin update` |
| [Zinit](#zinit) | `zinit update` |
| [Zi](#zi) | `zi update` |
| [Zap](#zap) | `zap update` |
| [Homebrew](#homebrew) | `brew update && brew upgrade` |
| [Arch Linux](#arch-linux) | `yay -S --noconfirm zsh-theme-powerlevel10k-git` |
| [Alpine Linux](#alpine-linux) | `apk update && apk upgrade` |
**IMPORTANT**: Restart Zsh after updating Powerlevel10k. [Do not use `source ~/.zshrc`](
#weird-things-happen-after-typing-source-zshrc).
### How do I uninstall Powerlevel10k?
1. Remove all references to "p10k" from `~/.zshrc`. You might have this snippet at the top:
```zsh
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
```
And this at the bottom:
```zsh
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
```
These are added by the [configuration wizard](#configuration-wizard). Remove them.
2. Remove all references to "powerlevel10k" from `~/.zshrc`, `~/.zpreztorc` and `~/.zimrc` (some
of these files may be missing -- this is normal). These references have been added manually by
yourself when installing Powerlevel10k. Refer to the [installation instructions](#installation)
if you need a reminder.
3. Verify that all references to "p10k" and "powerlevel10k" are gone from `~/.zshrc`, `~/.zpreztorc`
and `~/.zimrc`.
```zsh
grep -E 'p10k|powerlevel10k' ~/.zshrc ~/.zpreztorc ~/.zimrc 2>/dev/null
```
If this command produces output, there are still references to "p10k" or "powerlevel10k". You
need to remove them.
4. Delete Powerlevel10k configuration file. This file is created by the
[configuration wizard](#configuration-wizard) and may contain manual edits by yourself.
```zsh
rm -f ~/.p10k.zsh
```
5. Delete Powerlevel10k source files. These files have been downloaded when you've installed
Powerlevel10k. The command to delete them depends on which installation method you'd chosen.
Refer to the [installation instructions](#installation) if you need a reminder.
| Installation | Uninstall command |
|-------------------------------|------------------------------------------------------------------|
| [Manual](#manual) | `rm -rf ~/powerlevel10k` |
| [Oh My Zsh](#oh-my-zsh) | `rm -rf -- ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k` |
| [Prezto](#prezto) | n/a |
| [Zim](#zim) | `zimfw uninstall` |
| [Antigen](#antigen) | `antigen purge romkatv/powerlevel10k` |
| [Antidote](#antidote) | `antidote purge romkatv/powerlevel10k` |
| [Zplug](#zplug) | `zplug clean` |
| [Zgen](#zgen) | `zgen reset` |
| [Zplugin](#zplugin) | `zplugin delete romkatv/powerlevel10k` |
| [Zinit](#zinit) | `zinit delete romkatv/powerlevel10k` |
| [Zi](#zi) | `zi delete romkatv/powerlevel10k` |
| [Zap](#zap) | `zsh -ic 'zap clean'` |
| [Homebrew](#homebrew) | `brew uninstall powerlevel10k` |
| [Arch Linux](#arch-linux) | `yay -R --noconfirm zsh-theme-powerlevel10k-git` |
| [Alpine Linux](#alpine-linux) | `apk del zsh-theme-powerlevel10k` |
6. Restart Zsh. [Do not use `source ~/.zshrc`](#weird-things-happen-after-typing-source-zshrc).
7. Delete Powerlevel10k cache files.
```zsh
rm -rf -- "${XDG_CACHE_HOME:-$HOME/.cache}"/p10k-*(N) "${XDG_CACHE_HOME:-$HOME/.cache}"/gitstatus
```
### How do I install Powerlevel10k on a machine without Internet access?
1. Run this command on the machine without Internet access:
```sh
uname -sm | tr '[A-Z]' '[a-z]'
```
2. Run these commands on a machine connected to the Internet after replacing the value of
`target_uname` with the output of the previous command:
```sh
target_uname="replace this with the output of the previous command"
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k
GITSTATUS_CACHE_DIR="$HOME"/powerlevel10k/gitstatus/usrbin ~/powerlevel10k/gitstatus/install -f -s "${target_uname% *}" -m "${target_uname#* }"
```
3. Copy `~/powerlevel10k` from the machine connected to the Internet to the one without Internet
access.
4. Add `source ~/powerlevel10k/powerlevel10k.zsh-theme` to `~/.zshrc` on the machine without
Internet access:
```zsh
echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc
```
5. If `~/.zshrc` on the machine without Internet access sets `ZSH_THEME`, remove that line.
```zsh
sed -i.bak '/^ZSH_THEME=/d' ~/.zshrc
```
To update, remove `~/powerlevel10k` on both machines and repeat steps 1-3.
### Where can I ask for help and report bugs?
The best way to ask for help and to report bugs is to [open an issue](
https://github.com/romkatv/powerlevel10k/issues).
[Gitter](
https://gitter.im/powerlevel10k/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)
is another option.
If all else fails, email roman.perepelitsa@gmail.com.
If necessary, encrypt your communication with [this PGP key](
https://api.github.com/users/romkatv/gpg_keys).
### Which aspects of shell and terminal does Powerlevel10k affect?
Powerlevel10k defines prompt and nothing else. It sets [prompt-related options](
http://zsh.sourceforge.net/Doc/Release/Options.html#Prompting), and parameters `PS1` and `RPS1`.
Everything within the highlighted areas on the screenshot is produced by Powerlevel10k.
Powerlevel10k has no control over the terminal content or colors outside these areas.
Powerlevel10k does not affect:
- Terminal window/tab title.
- Colors used by `ls`.
- The behavior of `git` command.
- The content and style of Tab completions.
- Command line colors (syntax highlighting, autosuggestions, etc.).
- Key bindings.
- Aliases.
- Prompt parameters other than `PS1` and `RPS1`.
- Zsh options other than those [related to prompt](
http://zsh.sourceforge.net/Doc/Release/Options.html#Prompting).
- The set of available commands. Powerlevel10k does not install any new commands
with the only exception of `p10k`.
### I'm using Powerlevel9k with Oh My Zsh. How do I migrate?
1. Run this command:
```zsh
# Add powerlevel10k to the list of Oh My Zsh themes.
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git $ZSH_CUSTOM/themes/powerlevel10k
# Replace ZSH_THEME="powerlevel9k/powerlevel9k" with ZSH_THEME="powerlevel10k/powerlevel10k".
sed -i.bak 's/powerlevel9k/powerlevel10k/g' ~/.zshrc
# Restart Zsh.
exec zsh
```
2. *Optional but highly recommended:*
1. Install [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k).
1. Type `p10k configure` and choose your favorite prompt style.
*Related:*
- [Powerlevel9k compatibility.](#powerlevel9k-compatibility)
- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?](
#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config)
- [Extra or missing spaces in prompt compared to Powerlevel9k.](
#extra-or-missing-spaces-in-prompt-compared-to-powerlevel9k)
- [Configuration wizard.](#configuration-wizard)
### Is it really fast?
Yes. See [zsh-bench](https://github.com/romkatv/zsh-bench) or a direct comparison with
[Powerlevel9k](https://asciinema.org/a/NHRjK3BMePw66jtRVY2livHwZ) and
[Spaceship](https://asciinema.org/a/253094).
### How do I configure instant prompt?
See [instant prompt](#instant-prompt) to learn about instant prompt. This section explains how you
can enable and configure it and lists caveats that you should be aware of.
Instant prompt can be enabled either through `p10k configure` or by manually adding the following
code snippet at the top of `~/.zshrc`:
```zsh
# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
```
It's important that you copy the lines verbatim. Don't replace `source` with something else, don't
call `zcompile`, don't redirect output, etc.
When instant prompt is enabled, for the duration of Zsh initialization standard input is redirected
to `/dev/null` and standard output with standard error are redirected to a temporary file. Once Zsh
is fully initialized, standard file descriptors are restored and the content of the temporary file
is printed out.
When using instant prompt, you should carefully check any output that appears on Zsh startup as it
may indicate that initialization has been altered, or perhaps even broken, by instant prompt.
Initialization code that may require console input, such as asking for a keyring password or for a
*[y/n]* confirmation, must be moved above the instant prompt preamble in `~/.zshrc`. Initialization
code that merely prints to console but never reads from it will work correctly with instant prompt,
although output that normally has colors may appear uncolored. You can either leave it be, suppress
the output, or move it above the instant prompt preamble.
Here's an example of `~/.zshrc` that breaks when instant prompt is enabled:
```zsh
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
keychain id_rsa --agents ssh # asks for password
chatty-script # spams to stdout even when everything is fine
# ...
```
Fixed version:
```zsh
keychain id_rsa --agents ssh # moved before instant prompt
# OK to perform console I/O before this point.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
# From this point on, until zsh is fully initialized, console input won't work and
# console output may appear uncolored.
chatty-script >/dev/null # spam output suppressed
# ...
```
If `POWERLEVEL9K_INSTANT_PROMPT` is unset or set to `verbose`, Powerlevel10k will print a warning
when it detects console output during initialization to bring attention to potential issues. You can
silence this warning (without suppressing console output) with `POWERLEVEL9K_INSTANT_PROMPT=quiet`.
This is recommended if some initialization code in `~/.zshrc` prints to console and it's infeasible
to move it above the instant prompt preamble or to suppress its output. You can completely disable
instant prompt with `POWERLEVEL9K_INSTANT_PROMPT=off`. Do this if instant prompt breaks Zsh
initialization and you don't know how to fix it.
The value of `POWERLEVEL9K_INSTANT_PROMPT` can be changed by running `p10k configure` and selecting
the appropriate option on the *Instant Prompt* screen. Alternatively, you can search for
`POWERLEVEL9K_INSTANT_PROMPT` in the existing `~/.p10k.zsh` and change its value there.
*Note*: Instant prompt requires Zsh >= 5.4. It's OK to enable it even when using an older version of
Zsh but it won't do anything.
*FAQ*:
- [How do I initialize direnv when using instant prompt?](
#how-do-i-initialize-direnv-when-using-instant-prompt)
- [How do I export GPG_TTY when using instant prompt?](
#how-do-i-export-gpg_tty-when-using-instant-prompt)
### How do I initialize direnv when using instant prompt?
If you've enabled [instant prompt](#instant-prompt), you should have these lines at the top of
`~/.zshrc`:
```zsh
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
```
To initialize direnv you need to add one line above that block and one line below it.
```zsh
(( ${+commands[direnv]} )) && emulate zsh -c "$(direnv export zsh)"
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi
(( ${+commands[direnv]} )) && emulate zsh -c "$(direnv hook zsh)"
```
*Related*: [How do I export GPG_TTY when using instant prompt?](
#how-do-i-export-gpg_tty-when-using-instant-prompt)
### How do I export GPG_TTY when using instant prompt?
You can export `GPG_TTY` like this anywhere in `~/.zshrc`:
```zsh
export GPG_TTY=$TTY
```
This works whether you are using [instant prompt](#instant-prompt) or not. It works even if you
aren't using powerlevel10k. As an extra bonus, it's much faster than the commonly used
`export GPG_TTY=$(tty)`.
*Related*: [How do I initialize direnv when using instant prompt?](
#how-do-i-initialize-direnv-when-using-instant-prompt)
### What do different symbols in Git status mean?
When using Lean, Classic or Rainbow style, Git status may look like this:
```text
feature:master wip โฃ42โก42 โ 42โข42 *42 merge ~42 +42 !42 ?42
```
| Symbol | Meaning | Source |
| --------- | -------------------------------------------------------------------- | ------------------------------------------------------ |
| `feature` | current branch; replaced with `#tag` or `@commit` if not on a branch | `git status --ignore-submodules=dirty` |
| `master` | remote tracking branch; only shown if different from local branch | `git rev-parse --abbrev-ref --symbolic-full-name @{upstream}` |
| `wip` | the latest commit's summary contains "wip" or "WIP" | `git show --pretty=%s --no-patch HEAD` |
| `=` | up to date with the remote (neither ahead nor behind) | `git rev-list --count HEAD...@{upstream}` |
| `โฃ42` | this many commits behind the remote | `git rev-list --right-only --count HEAD...@{upstream}` |
| `โก42` | this many commits ahead of the remote | `git rev-list --left-only --count HEAD...@{upstream}` |
| `โ 42` | this many commits behind the push remote | `git rev-list --right-only --count HEAD...@{push}` |
| `โข42` | this many commits ahead of the push remote | `git rev-list --left-only --count HEAD...@{push}` |
| `*42` | this many stashes | `git stash list` |
| `merge` | repository state | `git status --ignore-submodules=dirty` |
| `~42` | this many merge conflicts | `git status --ignore-submodules=dirty` |
| `+42` | this many staged changes | `git status --ignore-submodules=dirty` |
| `!42` | this many unstaged changes | `git status --ignore-submodules=dirty` |
| `?42` | this many untracked files | `git status --ignore-submodules=dirty` |
| `โ` | the number of staged, unstaged or untracked files is unknown | `echo $POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY` or `git config --get bash.showDirtyState` |
*Related*: [How do I change the format of Git status?](#how-do-i-change-the-format-of-git-status)
### How do I change the format of Git status?
To change the format of Git status, open `~/.p10k.zsh`, search for `my_git_formatter` and edit its
source code.
*Related*: [What do different symbols in Git status mean?](
#what-do-different-symbols-in-git-status-mean)
### Why is Git status from `$HOME/.git` not displayed in prompt?
When using Lean, Classic or Rainbow style, `~/.p10k.zsh` contains the following parameter:
```zsh
# Don't show Git status in prompt for repositories whose workdir matches this pattern.
# For example, if set to '~', the Git repository at $HOME/.git will be ignored.
# Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'.
typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'
```
To see Git status for `$HOME/.git` in prompt, open `~/.p10k.zsh` and remove
`POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN`.
### Why does Git status sometimes appear grey and then gets colored after a short period of time?
tl;dr: When Git status in prompt is greyed out, it means Powerlevel10k is currently computing
up-to-date Git status in the background. Prompt will get automatically refreshed when this
computation completes.
When your current directory is within a Git repository, Powerlevel10k computes up-to-date Git
status after every command. If the repository is large, or the machine is slow, this computation
can take quite a bit of time. If it takes longer than 10 milliseconds (configurable via
`POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS`), Powerlevel10k displays the last known Git status in
grey and continues to compute up-to-date Git status in the background. When the computation
completes, Powerlevel10k refreshes prompt with new information, this time with colored Git status.
When using *Rainbow* style, Git status is displayed as black on grey while it's still being
computed. Depending on the terminal color palette, this may be difficult to read. In this case you
might want to change the background color to something lighter for more contrast. To do that, open
`~/.p10k.zsh`, search for `POWERLEVEL9K_VCS_LOADING_BACKGROUND`, uncomment it if it's commented out,
and change the value.
```zsh
typeset -g POWERLEVEL9K_VCS_LOADING_BACKGROUND=244
```
Type `source ~/.p10k.zsh` to apply your changes to the current Zsh session.
*Related*: [How do I change prompt colors?](#how-do-i-change-prompt-colors)
### How do I add username and/or hostname to prompt?
When using Lean, Classic or Rainbow style, prompt shows `username@hostname` when you are logged in
as root or via SSH. There is little value in showing `username` or `hostname` when you are logged in
to your local machine as a normal user. So the absence of `username@hostname` in your prompt is an
indication that you are working locally and that you aren't root. You can change it, however.
Open `~/.p10k.zsh`. Close to the top you can see the most important parameters that define which
segments are shown in your prompt. All generally useful prompt segments are listed in there. Some of
them are enabled, others are commented out. One of them is of interest to you.
```zsh
typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
...
context # user@hostname
...
)
```
Search for `context` to find the section in the config that lists parameters specific to this prompt
segment. You should see the following lines:
```zsh
# Don't show context unless running with privileges or in SSH.
# Tip: Remove the next line to always show context.
typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
```
If you follow the tip and remove (or comment out) the last line, you'll always see
`username@hostname` in prompt. You can change the format to just `username`, or change the color, by
adjusting the values of parameters nearby. There are plenty of comments to help you navigate.
You can also move `context` to a different position in `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS` or even
to `POWERLEVEL9K_LEFT_PROMPT_ELEMENTS`.
### Why some prompt segments appear and disappear as I'm typing?
Prompt segments can be configured to be shown only when the current command you are typing invokes
a relevant tool.
```zsh
# Show prompt segment "kubecontext" only when the command you are typing invokes
# invokes kubectl, helm, or kubens.
typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens'
```
Configs created by `p10k configure` may contain parameters of this kind. To customize when different
prompt segments are shown, open `~/.p10k.zsh`, search for `SHOW_ON_COMMAND` and either remove these
parameters or change their values.
You can also define a function in `~/.zshrc` to toggle the display of a prompt segment between
*always* and *on command*. This is similar to `kubeon`/`kubeoff` from
[kube-ps1](https://github.com/jonmosco/kube-ps1).
```zsh
function kube-toggle() {
if (( ${+POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND} )); then
unset POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND
else
POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens'
fi
p10k reload
if zle; then
zle push-input
zle accept-line
fi
}
```
Invoke this function by typing `kube-toggle`. You can also bind it to a key by adding two more lines
to `~/.zshrc`:
```zsh
zle -N kube-toggle
bindkey '^]' kube-toggle # ctrl-] to toggle kubecontext in powerlevel10k prompt
```
### How do I change prompt colors?
You can either [change the color palette used by your terminal](
#change-the-color-palette-used-by-your-terminal) or
[set colors through Powerlevel10k configuration parameters](
#set-colors-through-Powerlevel10k-configuration-parameters).
#### Change the color palette used by your terminal
How exactly you change the terminal color palette (a.k.a. color scheme, or theme) depends on the
kind of terminal you are using. Look around in terminal's settings/preferences or consult
documentation.
When you change the terminal color palette, it usually affects only the first 16 colors, numbered
from 0 to 15. In order to see any effect on Powerlevel10k prompt, you need to use prompt style that
utilizes these low-numbered colors. Type `p10k configure` and select *Rainbow*, *Lean* โ *8 colors*
or *Pure* โ *Original*. Other styles use higher-numbered colors, so they look the same in any
terminal color palette.
#### Set colors through Powerlevel10k configuration parameters
Open `~/.p10k.zsh`, search for "color", "foreground" and "background" and change values of
appropriate parameters. For example, here's how you can set the foreground of `time` prompt segment
to bright red:
```zsh
typeset -g POWERLEVEL9K_TIME_FOREGROUND=160
```
Colors are specified using numbers from 0 to 255. Colors from 0 to 15 look differently in different
terminals. Many terminals also support customization of these colors through color palettes
(a.k.a. color schemes, or themes). Colors from 16 to 255 always look the same.
Type `source ~/.p10k.zsh` to apply your changes to the current Zsh session.
To see how different numbered colors look in your terminal, run the following command:
```zsh
for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done
```
If your terminal supports truecolor, you can use 24-bit colors in the `#RRGGBB` format in addition
to the numbered colors.
```zsh
typeset -g POWERLEVEL9K_TIME_FOREGROUND='#FF0000'
```
*Related:*
- [Directory is difficult to see in prompt when using Rainbow style.](
#directory-is-difficult-to-see-in-prompt-when-using-rainbow-style)
- [Incorrect foreground color in VSCode Terminal.](#incorrect-foreground-color-in-vscode-terminal)
By default, VSCode Terminal may arbitrarily replace the foreground color of your choice with a
different color. This behavior can be
[turned off](https://code.visualstudio.com/docs/terminal/appearance#_minimum-contrast-ratio) in
VSCode settings.
### Why does Powerlevel10k spawn extra processes?
Powerlevel10k uses [gitstatus](https://github.com/romkatv/gitstatus) as the backend behind `vcs`
prompt; gitstatus spawns `gitstatusd` and `zsh`. See
[gitstatus](https://github.com/romkatv/gitstatus) for details. Powerlevel10k may also spawn `zsh`
to perform computation without blocking prompt. To avoid security hazard, these background processes
aren't shared by different interactive shells. They terminate automatically when the parent `zsh`
process terminates or runs `exec(3)`.
### Are there configuration options that make Powerlevel10k slow?
No, Powerlevel10k is always fast, with any configuration you throw at it. If you have noticeable
prompt latency when using Powerlevel10k, please
[open an issue](https://github.com/romkatv/powerlevel10k/issues).
### Is Powerlevel10k fast to load?
Yes. See [zsh-bench](https://github.com/romkatv/zsh-bench).
### What is the relationship between Powerlevel9k and Powerlevel10k?
Powerlevel10k was forked from Powerlevel9k in March 2019 after a week-long discussion in
[powerlevel9k#1170](https://github.com/Powerlevel9k/powerlevel9k/issues/1170). Powerlevel9k was
already a mature project with a large user base and a release cycle measured in months. Powerlevel10k
was spun off to iterate on performance improvements and new features at much higher pace.
Powerlevel9k and Powerlevel10k are independent projects. When using one, you shouldn't install the
other. Issues should be filed against the project that you actually use. There are no individuals
that have commit rights in both repositories. All bug fixes and new features committed to
Powerlevel9k repository get ported to Powerlevel10k.
Over time, virtually all code in Powerlevel10k has been rewritten. There is currently no meaningful
overlap between the implementations of Powerlevel9k and Powerlevel10k.
Powerlevel10k is committed to maintaining backward compatibility with all configs indefinitely. This
commitment covers all configuration parameters recognized by Powerlevel9k (see
[Powerlevel9k compatibility](#powerlevel9k-compatibility)) and additional parameters that only
Powerlevel10k understands. Names of all parameters in Powerlevel10k start with `POWERLEVEL9K_` for
consistency.
### Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?
Almost. There are a few differences.
- By default only `git` vcs backend is enabled in Powerlevel10k. If you need `svn` and `hg`, add
them to `POWERLEVEL9K_VCS_BACKENDS`. These backends aren't yet optimized in Powerlevel10k, so
enabling them will make prompt *very slow*.
- Powerlevel10k doesn't support `POWERLEVEL9K_VCS_SHOW_SUBMODULE_DIRTY=true`.
- Powerlevel10k strives to be bug-compatible with Powerlevel9k but not when it comes to egregious
bugs. If you accidentally rely on these bugs, your prompt will differ between Powerlevel9k and
Powerlevel10k. Some examples:
- Powerlevel9k ignores some options that are set after the theme is sourced while Powerlevel10k
respects all options. If you see different icons in Powerlevel9k and Powerlevel10k, you've
probably defined `POWERLEVEL9K_MODE` before sourcing the theme. This parameter gets ignored
by Powerlevel9k but honored by Powerlevel10k. If you want your prompt to look in Powerlevel10k
the same as in Powerlevel9k, remove `POWERLEVEL9K_MODE`.
- Powerlevel9k doesn't respect `ZLE_RPROMPT_INDENT`. As a result, right prompt in Powerlevel10k
can have an extra space at the end compared to Powerlevel9k. Set `ZLE_RPROMPT_INDENT=0` if you
don't want that space. More details in
[troubleshooting](#extra-space-without-background-on-the-right-side-of-right-prompt).
- Powerlevel9k has inconsistent spacing around icons. This was fixed in Powerlevel10k. Set
`POWERLEVEL9K_LEGACY_ICON_SPACING=true` to get the same spacing as in Powerlevel9k. More
details in [troubleshooting](#extra-or-missing-spaces-around-icons).
- There are dozens more bugs in Powerlevel9k that don't exist in Powerlevel10k.
If you notice any other changes in prompt appearance when switching from Powerlevel9k to
Powerlevel10k, please [open an issue](https://github.com/romkatv/powerlevel10k/issues).
### What is the best prompt style in the configuration wizard?
There are as many opinions on what constitutes the best prompt as there are people. It mostly comes
down to personal preference. There are, however, a few hidden implications of different choices.
Pure style is an exact replication of [Pure Zsh theme](https://github.com/sindresorhus/pure). It
exists to ease the migration for users of this theme. Unless you are one of them, choose Lean
style over Pure.
If you want to confine prompt colors to the selected terminal color palette (say, *Solarized Dark*),
use *Rainbow*, *Lean* โ *8 colors* or *Pure* โ *Original*. Other styles use fixed colors and thus
look the same in any terminal color palette.
All styles except Pure have an option to use *ASCII* charset. Prompt will look less pretty but will
render correctly with all fonts and in all locales.
If you enable transient prompt, take advantage of two-line prompt. You'll get the benefit of
extra space for typing commands without the usual drawback of reduced scrollback density. Having
all commands start from the same offset is also nice.
Similarly, if you enable transient prompt, sparse prompt (with an empty line before prompt) is a
great choice.
If you are using vi keymap, choose prompt with `prompt_char` in it (shown as green `โฏ` in the
wizard). This symbol changes depending on vi mode: `โฏ`, `โฎ`, `V`, `โถ` for insert, command, visual
and replace mode respectively. When a command fails, the symbol turns red. *Lean* style always has
`prompt_char` in it. *Rainbow* and *Classic* styles have it only in the two-line configuration
without left frame.
If you value horizontal space or prefer minimalist aesthetics:
- Use a monospace font, such as [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k).
Non-monospace fonts require extra space after icons that are larger than a single column.
- Use Lean style. Compared to Classic and Rainbow, it saves two characters per prompt segment.
- Disable *current time* and *frame*.
- Use *few icons*. The extra icons enabled by the *many icons* option primarily serve decorative
function. Informative icons, such as background job indicator, will be shown either way.
*Note*: You can run configuration wizard as many times as you like. Type `p10k configure` to try new
prompt style.
### How to make Powerlevel10k look like robbyrussell Oh My Zsh theme?
Use [this config](
https://github.com/romkatv/powerlevel10k/blob/master/config/p10k-robbyrussell.zsh).
You can either download it, save as `~/.p10k.zsh` and `source ~/.p10k.zsh` from `~/.zshrc`, or
source `p10k-robbyrussell.zsh` directly from your cloned `powerlevel10k` repository.
### Can prompts for completed commands display error status for *those* commands instead of the commands preceding them?
No. When you hit *ENTER* and the command you've typed starts running, its error status isn't yet
known, so it cannot be shown in prompt. When the command completes, the error status gets known but
it's no longer possible to update prompt for *that* command. This is why the error status for every
command is reflected in the *next* prompt.
For details, see [this post on /r/zsh](
https://www.reddit.com/r/zsh/comments/eg49ff/powerlevel10k_prompt_history_exit_code_colors/fc5huku).
### What is the minimum supported Zsh version?
Zsh 5.3 or newer should work. Fast startup requires Zsh >= 5.4.
### How were these screenshots and animated gifs created?
All screenshots and animated gifs were recorded in GNOME Terminal with
[the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) and Tango Dark color palette with
custom background color (`#171A1B` instead of `#2E3436` -- twice as dark).
Syntax highlighting, where present, was provided by [zsh-syntax-highlighting](
https://github.com/zsh-users/zsh-syntax-highlighting).
### How was the recommended font created?
[The recommended font](#meslo-nerd-font-patched-for-powerlevel10k) is the product of many
individuals. Its origin is *Bitstream Vera Sans Mono*, which has given birth to *Menlo*, which in
turn has spawned *Meslo*. Finally, extra glyphs have been added to *Meslo* with scripts forked
from Nerd Fonts. The final font is released under the terms of
[Apache License](
https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20License.txt).
MesloLGS NF font can be recreated with the following command (requires `git` and `docker`):
```zsh
git clone --depth=1 https://github.com/romkatv/nerd-fonts.git
cd nerd-fonts
./build 'Meslo/S/*'
```
If everything goes well, four `ttf` files will appear in `./out`.
### How to package Powerlevel10k for distribution?
It's currently neither easy nor recommended to package and distribute Powerlevel10k. There are no
instructions you can follow that would allow you to easily update your package when new versions of
Powerlevel10k are released. This may change in the future but not soon.
## Troubleshooting
- [`[oh-my-zsh] theme 'powerlevel10k/powerlevel10k' not found`](#oh-my-zsh-theme-powerlevel10kpowerlevel10k-not-found)
- [Question mark in prompt](#question-mark-in-prompt)
- [Icons, glyphs or powerline symbols don't render](#icons-glyphs-or-powerline-symbols-dont-render)
- [Sub-pixel imperfections around powerline symbols](#sub-pixel-imperfections-around-powerline-symbols)
- [Error: character not in range](#error-character-not-in-range)
- [Cursor is in the wrong place](#cursor-is-in-the-wrong-place)
- [Prompt wrapping around in a weird way](#prompt-wrapping-around-in-a-weird-way)
- [Right prompt is in the wrong place](#right-prompt-is-in-the-wrong-place)
- [Configuration wizard runs automatically every time Zsh is started](#configuration-wizard-runs-automatically-every-time-zsh-is-started)
- [Some prompt styles are missing from the configuration wizard](#some-prompt-styles-are-missing-from-the-configuration-wizard)
- [Cannot install the recommended font](#cannot-install-the-recommended-font)
- [Extra or missing spaces in prompt compared to Powerlevel9k](#extra-or-missing-spaces-in-prompt-compared-to-powerlevel9k)
- [Extra space without background on the right side of right prompt](#extra-space-without-background-on-the-right-side-of-right-prompt)
- [Extra or missing spaces around icons](#extra-or-missing-spaces-around-icons)
- [Weird things happen after typing `source ~/.zshrc`](#weird-things-happen-after-typing-source-zshrc)
- [Transient prompt stops working after some time](#transient-prompt-stops-working-after-some-time)
- [Cannot make Powerlevel10k work with my plugin manager](#cannot-make-powerlevel10k-work-with-my-plugin-manager)
- [Directory is difficult to see in prompt when using Rainbow style](#directory-is-difficult-to-see-in-prompt-when-using-rainbow-style)
- [Incorrect foreground color in VSCode Terminal.](#incorrect-foreground-color-in-vscode-terminal)
- [Horrific mess when resizing terminal window](#horrific-mess-when-resizing-terminal-window)
- [Icons cut off in Konsole](#icons-cut-off-in-konsole)
- [Arch Linux logo has a dot in the bottom right corner](#arch-linux-logo-has-a-dot-in-the-bottom-right-corner)
- [Incorrect git status in prompt](#incorrect-git-status-in-prompt)
### `[oh-my-zsh] theme 'powerlevel10k/powerlevel10k' not found`
When opening a terminal, or starting zsh manually, you may encounter this error message:
```text
[oh-my-zsh] theme 'powerlevel10k/powerlevel10k' not found
```
1. First, run `typeset -p P9K_VERSION` to check whether Powerlevel10k has been loaded.
- If `typeset -p P9K_VERSION` succeeds and prints something like `typeset P9K_VERSION=1.19.14`
(the version could be different), remove the following line from `~/.zshrc`:
```zsh
ZSH_THEME="powerlevel10k/powerlevel10k"
```
- If `typeset -p P9K_VERSION` fails with the error `typeset: no such variable: P9K_VERSION`, run
the following command:
```zsh
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
```
2. Restart Zsh with `exec zsh`.
### Question mark in prompt
If it looks like a regular `?`, that's normal. It means you have untracked files in the current Git
repository. Type `git status` to see these files. You can change this symbol or disable the display
of untracked files altogether. Search for `untracked files` in `~/.p10k.zsh`.
*FAQ*: [What do different symbols in Git status mean?](
#what-do-different-symbols-in-git-status-mean)
You can also get a weird-looking question mark in your prompt if your terminal's font is missing
some glyphs. See [icons, glyphs or powerline symbols don't render](
#icons-glyphs-or-powerline-symbols-dont-render).
### Icons, glyphs or powerline symbols don't render
Restart your terminal, [install the recommended font](#meslo-nerd-font-patched-for-powerlevel10k)
and run `p10k configure`.
### Sub-pixel imperfections around powerline symbols
There are three imperfections on the screenshot. From left to right:
1. A thin blue line (a sub-pixel gap) between the content of a prompt segment and the following
powerline connection.
1. Incorrect alignment of a powerline connection and the following prompt segment. The connection
appears shifted to the right.
1. A thin red line below a powerline connection. The connection appears shifted up.
Zsh themes don't have down-to-pixel control over the terminal content. Everything you see on the
screen is made of monospace characters. A white powerline prompt segment is made of text on white
background followed by U+E0B0 (a right-pointing triangle).
If Powerlevel10k prompt has imperfections around powerline symbols, you'll see exactly the same
imperfections with all powerline themes (Agnoster, Powerlevel9k, Powerline, etc.)
There are several things you can try to deal with these imperfections:
- Try [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). If you are already using
it, switching to another font may help but is unlikely.
- Change terminal font size one point up or down. For example, in iTerm2 powerline prompt looks
perfect at font sizes 11 and 13 but breaks down at 12.
- Enable builtin powerline glyphs in terminal settings if your terminal supports it (iTerm2 does).
- Change font hinting and/or anti-aliasing mode in the terminal settings.
- Shift all text one pixel up/down/left/right if your terminal has an option to do so.
- Try a different terminal.
A more radical solution is to switch to prompt style without background. Type `p10k configure` and
select *Lean*. This style has a modern lightweight look. As a bonus, it doesn't suffer from
rendering imperfections that afflict powerline-style prompt.
### Error: character not in range
Type `echo '\u276F'`. If you get an error saying "zsh: character not in range", your locale
doesn't support UTF-8. You need to fix it. If you are running Zsh over SSH, see
[this](https://github.com/romkatv/powerlevel10k/issues/153#issuecomment-518347833). If you are
running Zsh locally, Google "set UTF-8 locale in *your OS*".
### Cursor is in the wrong place
Type `echo '\u276F'`. If you get an error saying "zsh: character not in range", see the
[previous section](#zsh-character-not-in-range).
If the `echo` command prints `โฏ` but the cursor is still in the wrong place, install
[the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) and run
`p10k configure`.
If this doesn't help, add `unset ZLE_RPROMPT_INDENT` at the bottom of `~/.zshrc`.
Still having issues? Run the following command to diagnose the problem:
```zsh
() {
emulate -L zsh
setopt err_return no_unset
local text
print -rl -- 'Select a part of your prompt from the terminal window and paste it below.' ''
read -r '?Prompt: ' text
local -i len=${(m)#text}
local frame="+-${(pl.$len..-.):-}-+"
print -lr -- $frame "| $text |" $frame
}
```
#### If the prompt line aligns with the frame
```text
+------------------------------+
| romka@adam โ ~/powerlevel10k |
+------------------------------+
```
If the output of the command is aligned for every part of your prompt (left and right), this
indicates a bug in the theme or your config. Use this command to diagnose it:
```zsh
print -rl -- ${(eq+)PROMPT} ${(eq+)RPROMPT}
```
Look for `%{...%}` and backslash escapes in the output. If there are any, they are the likely
culprits. Open an issue if you get stuck.
#### If the prompt line is longer than the frame
```text
+-----------------------------+
| romka@adam โ ~/powerlevel10k |
+-----------------------------+
```
This is usually caused by a terminal bug or misconfiguration that makes it print ambiguous-width
characters as double-width instead of single width. For example,
[this issue](https://github.com/romkatv/powerlevel10k/issues/165).
#### If the prompt line is shorter than the frame and is mangled
```text
+------------------------------+
| romka@adam โ~/powerlevel10k |
+------------------------------+
```
Note that this prompt is different from the original as it's missing a space after the check mark.
This can be caused by a low-level bug in macOS. See
[this issue](https://github.com/romkatv/powerlevel10k/issues/241).
This can also happen if prompt contains glyphs designated as "wide" in the Unicode standard and your
terminal incorrectly displays them as non-wide. Terminals suffering from this limitation include
Konsole, Hyper and the integrated VSCode Terminal. The solution is to use a different terminal or
remove all wide glyphs from prompt.
#### If the prompt line is shorter than the frame and is not mangled
```text
+--------------------------------+
| romka@adam โ ~/powerlevel10k |
+--------------------------------+
```
This can be caused by misconfigured locale. See
[this issue](https://github.com/romkatv/powerlevel10k/issues/251).
### Prompt wrapping around in a weird way
See [cursor is in the wrong place](#cursor-is-in-the-wrong-place).
### Right prompt is in the wrong place
See [cursor is in the wrong place](#cursor-is-in-the-wrong-place).
### Configuration wizard runs automatically every time Zsh is started
When Powerlevel10k starts, it automatically runs `p10k configure` if no `POWERLEVEL9K_*`
parameters are defined. Based on your prompt style choices, the configuration wizard creates
`~/.p10k.zsh` with a bunch of `POWERLEVEL9K_*` parameters in it and adds a line to `~/.zshrc` to
source this file. The next time you start Zsh, the configuration wizard shouldn't run automatically.
If it does, this means the evaluation of `~/.zshrc` terminates prematurely before it reaches the
line that sources `~/.p10k.zsh`. This most often happens due to syntax errors in `~/.zshrc`. These
errors get hidden by the configuration wizard screen, so you don't notice them. When you exit
configuration wizard, look for error messages. You can also use
`POWERLEVEL9K_DISABLE_CONFIGURATION_WIZARD=true zsh` to start Zsh without automatically running the
configuration wizard. Once you can see the errors, fix `~/.zshrc` to get rid of them.
### Some prompt styles are missing from the configuration wizard
If Zsh version is below 5.7.1 or `COLORTERM` environment variable is neither `24bit` nor
`truecolor`, configuration wizard won't offer Pure style with Snazzy color scheme. *Fix*: Install
Zsh >= 5.7.1 and use a terminal with truecolor support. Verify with `print -P '%F{#ff0000}red%f'`.
If the terminal can display fewer than 256 colors, configuration wizard preselects Lean style with
8 colors. All other styles require at least 256 colors. *Fix*: Use a terminal with 256 color support
and make sure that `TERM` environment variable is set correctly. Verify with
`print $terminfo[colors]`.
If there is no UTF-8 locale on the system, configuration wizard won't offer prompt styles that use
Unicode characters. *Fix*: Install a UTF-8 locale. Verify with `locale -a`.
Another case in which configuration wizard may not offer Unicode prompt styles is when the
`MULTIBYTE` shell option is disabled. *Fix*: Enable the `MULTIBYTE` option, or rather don't disable
it (this option is enabled in Zsh by default). Verify with `print -r -- ${options[MULTIBYTE]}`.
When `MULTIBYTE` is enabled and a UTF-8 locale is available, the first few questions asked by the
configuration wizard assess capabilities of the terminal font. If your answers indicate that some
glyphs don't render correctly, configuration wizard won't offer prompt styles that use them. *Fix*:
Restart your terminal and install
[the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). Verify by running
`p10k configure` and checking that all glyphs render correctly.
### Cannot install the recommended font
Once you download [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k),
you can install it just like any other font. Google "how to install fonts on *your OS*".
### Extra or missing spaces in prompt compared to Powerlevel9k
tl;dr: Add `ZLE_RPROMPT_INDENT=0` and `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get
the same prompt spacing as in Powerlevel9k.
When using Powerlevel10k with a Powerlevel9k config, you might get additional spaces in prompt here
and there. These come in two flavors.
#### Extra space without background on the right side of right prompt
tl;dr: Add `ZLE_RPROMPT_INDENT=0` to `~/.zshrc` to get rid of that space.
From [Zsh documentation](
http://zsh.sourceforge.net/Doc/Release/Parameters.html#index-ZLE_005fRPROMPT_005fINDENT):
> `ZLE_RPROMPT_INDENT `
>
> If set, used to give the indentation between the right hand side of the right prompt in the line
> editor as given by `RPS1` or `RPROMPT` and the right hand side of the screen. If not set, the
> value `1` is used.
>
> Typically this will be used to set the value to `0` so that the prompt appears flush with the
> right hand side of the screen.
Powerlevel10k respects this parameter. If you set `ZLE_RPROMPT_INDENT=1` (or leave it unset, which
is the same thing as setting it to `1`), you'll get an empty space to the right of right prompt. If
you set `ZLE_RPROMPT_INDENT=0`, your prompt will go to the edge of the terminal. This is how it
works in every theme except Powerlevel9k.
Powerlevel9k issue: [powerlevel9k#1292](https://github.com/Powerlevel9k/powerlevel9k/issues/1292).
It's been fixed in the development branch of Powerlevel9k but the fix hasn't yet made it to
`master`.
Add `ZLE_RPROMPT_INDENT=0` to `~/.zshrc` to get the same spacing on the right edge of prompt as in
Powerlevel9k.
*Note:* Several versions of Zsh have bugs that get triggered when you set `ZLE_RPROMPT_INDENT=0`.
Powerlevel10k can work around these bugs when using powerline prompt style. If you notice visual
artifacts in prompt, or wrong cursor position, try removing `ZLE_RPROMPT_INDENT` from `~/.zshrc`.
#### Extra or missing spaces around icons
tl;dr: Add `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get the same spacing around
icons as in Powerlevel9k.
Spacing around icons in Powerlevel9k is inconsistent.
This inconsistency is a constant source of annoyance, so it was fixed in Powerlevel10k. You can add
`POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get the same spacing around icons as in
Powerlevel9k.
*Note:* It's not a good idea to define `POWERLEVEL9K_LEGACY_ICON_SPACING` when using
`p10k configure`.
### Weird things happen after typing `source ~/.zshrc`
It's almost always a bad idea to run `source ~/.zshrc`, whether you are using Powerlevel10k or not.
This command may result in random errors, misbehaving code and progressive slowdown of Zsh.
If you've made changes to `~/.zshrc` or to files sourced by it, restart Zsh to apply them. The most
reliable way to do this is to type `exit` and then start a new Zsh session. You can also use
`exec zsh`. While not exactly equivalent to complete Zsh restart, this command is much more reliable
than `source ~/.zshrc`.
### Transient prompt stops working after some time
See [weird things happen after typing `source ~/.zshrc`](
#weird-things-happen-after-typing-source-zshrc).
### Cannot make Powerlevel10k work with my plugin manager
If the [installation instructions](#installation) didn't work for you, try disabling your current
theme (so that you end up with no theme) and then installing Powerlevel10k manually.
1. Disable the current theme in your framework / plugin manager.
- **oh-my-zsh:** Open `~/.zshrc` and remove the line that sets `ZSH_THEME`. It might look like this:
`ZSH_THEME="powerlevel9k/powerlevel9k"`.
- **zplug:** Open `~/.zshrc` and remove the `zplug` command that refers to your current theme. For
example, if you are currently using Powerlevel9k, look for
`zplug bhilburn/powerlevel9k, use:powerlevel9k.zsh-theme`.
- **prezto:** Open `~/.zpreztorc` and put `zstyle :prezto:module:prompt theme off` in it. Remove
any other command that sets `theme` such as `zstyle :prezto:module:prompt theme powerlevel9k`.
- **antigen:** Open `~/.zshrc` and remove the line that sets `antigen theme`. It might look like
this: `antigen theme powerlevel9k/powerlevel9k`.
2. Install Powerlevel10k manually.
```zsh
git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k
echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc
```
This method of installation won't make anything slower or otherwise sub-par.
### Directory is difficult to see in prompt when using Rainbow style
In Rainbow style the current working directory is shown with bright white text on blue background.
The white is fixed and always looks the same but the appearance of "blue" is defined by your
terminal color palette. If it's very light, it may be difficult to see white text on it.
There are several ways to fix this.
- Type `p10k configure` and choose a more readable prompt style.
- [Change terminal color palette](#change-the-color-palette-used-by-your-terminal). Try Tango Dark
or Solarized Dark, or change just the "blue" color.
- [Change directory background and/or foreground color](#set-colors-through-Powerlevel10k-configuration-parameters).
The parameters you are looking for are called `POWERLEVEL9K_DIR_BACKGROUND`,
`POWERLEVEL9K_DIR_FOREGROUND`, `POWERLEVEL9K_DIR_SHORTENED_FOREGROUND`,
`POWERLEVEL9K_DIR_ANCHOR_FOREGROUND` and `POWERLEVEL9K_DIR_ANCHOR_BOLD`. You can find them in
`~/.p10k.zsh`.
*Related*: [Incorrect foreground color in VSCode Terminal.](#incorrect-foreground-color-in-vscode-terminal)
### Incorrect foreground color in VSCode Terminal
By default, VSCode Terminal may arbitrarily replace the foreground color of your choice with a
different color. This behavior can be
[turned off](https://code.visualstudio.com/docs/terminal/appearance#_minimum-contrast-ratio) in
VSCode settings.
### Horrific mess when resizing terminal window
When you resize a terminal window horizontally back and forth a few times, you might see this ugly
picture.
tl;dr: This issue arises when a terminal reflows Zsh prompt upon resizing. It isn't specific to
Powerlevel10k. See [mitigation](#mitigation).
*Note: This section [used to say](
https://github.com/romkatv/powerlevel10k/blob/dce00cdb5daaa8a519df234a7012ba3257b644d4/README.md#horrific-mess-when-resizing-terminal-window)
that the problem is caused by a bug in Zsh. While it's true that it's possible to avoid the problem
in many circumstances by modifying Zsh, it cannot be completely resolved this way. Thus it's unfair
to pin the blame on Zsh.*
#### The anatomy of the problem
The issue is manifested when the vertical distance between the start of the current prompt and the
cursor (henceforth `VD`) changes when the terminal window is resized.
When a terminal window gets shrunk horizontally, there are two ways for a terminal to handle long
lines that no longer fit: *reflow* or *truncate*.
Terminal content before shrinking:
Terminal reflows text when shrinking:
Terminal truncates text when shrinking:
Reflowing strategy can change the height of terminal content. If such content happens to be between
the start of the current prompt and the cursor, Zsh will print prompt on the wrong line. Truncation
strategy never changes the height of terminal content, so it doesn't trigger this issue.
Let's see how the issue plays out in slow motion. We'll start by launching `zsh -f` and pasting
the following code:
```zsh
function pause() { read -s }
functions -M pause 0
reset
print -l {1..3}
setopt prompt_subst
PROMPT=$'${$((pause()))+}left>${(pl.$((COLUMNS-12))..-.)} '
```
When `PROMPT` gets expanded, it calls `pause` to let us observe the state of the terminal. Here's
the initial state:
Zsh keeps track of the cursor position relative to the start of the current prompt. In this case it
knows that the cursor is one line below. When we shrink the terminal window, it looks like this:
At this point the terminal sends `SIGWINCH` to Zsh to notify it about changes in the terminal
dimensions. Note that this signal is sent *after* the content of the terminal has been reflown.
When Zsh receives `SIGWINCH`, it attempts to erase the current prompt and print it anew. It goes to
the position where it *thinks* the current prompt is -- one line above the cursor (!) -- erases all
terminal content that follows and prints reexpanded prompt there. However, after resizing prompt is
no longer one line above the cursor. It's two lines above! Zsh ends up printing new prompt one line
too low.
In this case we ended up with unwanted junk content because `VD` has *increased*. When you make
terminal window wider, `VD` can also *decrease*, which would result in the new prompt being printed
higher than intended, potentially erasing useful content in the process.
Here are a few more examples where shrinking terminal window increased `VD`.
- Simple one-line left prompt with right prompt. No `prompt_subst`. Note that the cursor is below
the prompt line (hit *ESC-ENTER* to get it there).
- Simple one-line left prompt. No `prompt_subst`, no right prompt. Here `VD` is bound to increase
upon terminal shrinking due to the command line wrapping around.
#### Zsh patch
[This Zsh patch](https://github.com/romkatv/zsh/tree/fix-winchanged) fixes the issue on some
terminals. The idea behind the patch is to use `sc` (save cursor) terminal capability before
printing prompt and `rc` (restore cursor) to move cursor back to the original position when prompt
needs to be refreshed.
The patch works only on terminals that reflow saved cursor position together with text when the
terminal window is resized. The patch has no observable effect on terminals that don't reflow text
on resize (both patched and unpatched Zsh behave correctly) and on terminals that reflow text but
not the saved cursor position (both patched and unpatched Zsh redraw prompt at the same incorrect
position). In other words, the patch fixes the resizing issue on some terminals while keeping the
behavior unchanged on others.
There are two alternative approaches to patching Zsh that may seem to work at first glance but in
fact don't:
- Instead of `sc`, use `u7` terminal capability to query the current cursor position and then `cup`
to go back to it. This doesn't work because the absolute position of the start of the current
prompt changes when text gets reflown.
- Recompute `VD` based on new terminal dimensions before attempting to refresh prompt. This doesn't
work because Zsh doesn't know whether terminal reflows text or truncates it. If Zsh could somehow
know that the terminal reflows text, this approach still wouldn't work on terminals that
continuously reflow text and rapid-fire `SIGWINCH` when the window is being resized. In such
environment real terminal dimensions go out of sync with what Zsh thinks the dimensions are.
There is no ETA for the patch making its way into upstream Zsh. See [discussion](
https://www.zsh.org/mla/workers//2019/msg00561.html).
#### Mitigation
There are a few mitigation options for this issue.
- Use [kitty](https://sw.kovidgoyal.net/kitty/) terminal version >= 0.24.0 and enable terminal-shell
integration in Powerlevel10k by defining `POWERLEVEL9K_TERM_SHELL_INTEGRATION=true` in
`~/.p10k.zsh`.
- Apply [the patch](#zsh-patch) and [rebuild Zsh from source](
https://github.com/zsh-users/zsh/blob/master/INSTALL). It won't help if you are using Alacritty,
kitty or some other terminal that reflows text on resize but doesn't reflow saved cursor position.
On such terminals the patch will have no visible effect.
- Disable text reflowing on window resize in terminal settings. If your terminal doesn't have this
setting, try a different terminal.
- Avoid long lines between the start of prompt and cursor.
1. Disable ruler with `POWERLEVEL9K_SHOW_RULER=false`.
2. Disable prompt connection with `POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '`.
3. Disable right frame with `POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=''`,
`POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=''` and
`POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=''`.
4. Set `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=()`. Right prompt on the last prompt line will cause
resizing issues only when the cursor is below it. This isn't very common, so you might want to
keep some elements in `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS` provided that none of them are
succeeded by `newline`.
### Icons cut off in Konsole
When using Konsole with a non-monospace font, icons may be cut off on the right side. Here
"non-monospace" refers to any font with glyphs wider than a single column, or wider than two columns
for glyphs designated as "wide" in the Unicode standard.
The last line on the screenshot shows a cut off Arch Linux logo.
There are several mitigation options for this issue.
1. Use a different terminal. Konsole is the only terminal that exhibits this behavior.
2. Use a monospace font.
3. Manually add an extra space after the icon that gets cut off. For example, if the content of
`os_icon` prompt segment gets cut off, open `~/.p10k.zsh`, search for
`POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION` and change it as follows:
```zsh
typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='${P9K_CONTENT} ' # extra space at the end
```
4. Use a different icon that is monospace. For example, if Arch Linux logo gets cut off, add
the following parameter to `~/.p10k.zsh`:
```zsh
typeset -g POWERLEVEL9K_LINUX_ARCH_ICON='Arch' # plain "Arch" in place of a logo
```
5. Disable the display of the icon that gets cut off. For example, if the content of
`os_icon` prompt segment gets cut off, open `~/.p10k.zsh` and remove `os_icon` from
`POWERLEVEL9K_LEFT_PROMPT_ELEMENTS` and `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS`.
*Note*: [Non-monospace fonts are not officially supported by Konsole](
https://bugs.kde.org/show_bug.cgi?id=418553#c5).
### Arch Linux logo has a dot in the bottom right corner
Some fonts have this incorrect dotted icon in bold typeface. There are two ways to fix this issue.
1. Use a font with a correct Arch Linux logo in bold typeface. For example,
[the recommended Powerlevel10k font](#meslo-nerd-font-patched-for-powerlevel10k).
2. Display the icon in regular (non-bold) typeface. To do this, open `~/.p10k.zsh`, search for
`POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION` and remove `%B` from its value.
```zsh
typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='${P9K_CONTENT}' # not bold
```
### Incorrect git status in prompt
Powerlevel10k uses [gitstatusd](https://github.com/romkatv/gitstatus) to inspect the state of git
repositories. The project relies on the [libgit2](https://github.com/libgit2/libgit2) library, which
has some gaps in its implementation. Under some conditions, this may result in discrepancies between
the real state of a git repository (reflected by `git status`) and what gets shown in the
Powerlevel10k prompt.
Most notably, [libgit2 does not support `skipHash`](https://github.com/libgit2/libgit2/issues/6531).
If you see incorrect git status in prompt, run `git config -l` and check whether `skipHash` is
enabled. If it is, consider disabling it. Keep in mind that `skipHash` may be implicitly enabled
when activating certain git features, such as `manyFiles`.